Preferencje help
Polish version English version Język
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 19

Liczba wyników na stronie
Pierwsza strona wyników Pięć stron wyników wstecz Poprzednia strona wyników Strona / 1 Następna strona wyników Pięć stron wyników wprzód Ostatnia strona wyników

Wyniki wyszukiwania

help Sortuj według:

help Ogranicz wyniki do:
Pierwsza strona wyników Pięć stron wyników wstecz Poprzednia strona wyników Strona / 1 Następna strona wyników Pięć stron wyników wprzód Ostatnia strona wyników
1

Influence of heating power station on the chemical composition of wood, bark, branches and main roots of Scotch pine (Pinus sylvestris L.)

100%
Krutul D., Makowski T., Hrols J.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2006
|
tom 59
2

Investigation of the quality of blanks of wooden pallets

100%
Spulle U., Pusinskis V., Hrols J., Dolacis J.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2005
|
tom 57
The mechanical and quality properties of palettes prepared from spruce (Picea abies L. Karst.) wood (with and without knots), pine (Pinus sylvestris L.) wood (with and without knots), alder (Alnus incana L. Moench) wood (with and without knots) and aspen (Populus tremula L.) wood (with and without knots) were assessed. It has been found that, in the case of pine wood, the first quality class and defects comprise 73.4% and 18.2%, respectively, of the preparation. For spruce wood, the first quality class and defects comprise 67.4% and 12%, respectively, of the preparation. For alder wood, the first quality class and defects are 62.5% and 22.9%, respectively, of the preparation. For aspen wood, the first quality class and defects comprise 67% and 20.8%, respectively, of the preparation. In the case of pine wood (without knots), mechanical strength and modulus of elasticity are higher than in the case of spruce wood (without knots), namely, bending strength is higher by 8.5% on the average, while modulus of elasticity is higher by 8.3%. In the case of pine wood (with knots), bending strength is by 4.5% lower than for spruce wood (with knots), while modulus of elasticity is higher by 8.5%. In the case of alder wood (without knots), mechanical strength and modulus of elasticity are lower than for aspen wood (without knots), namely, bending strength is 17.5%, and modulus of elasticity is 14.2% on the average. In the case of alder wood (with knots), bending strength is higher than tor aspen wood (with knots), namely, by 22.6% on the average, and modulus of elasticity is higher, namely by 36%.
3

Physico-technical characteristics of firewood

100%
Dolacis J., Tomsons E., Hrols J.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2005
|
tom 56
4

Dependence of the wood heat value on moisture content

100%
Tomsons E., Tuherm H., Dolacis J., Hrols J.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2003
|
tom 53
5

Some physical and mechanical properties of wild cherry (Prunus avium L.) wood growing in Latvia

100%
Dolacis J., Daugaviete M., Tuherm H., Hrols J.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2003
|
tom 53
6

The composition of hexane extractives from oak wood (Quercus robur L.) investigated by chromatographic methods

88%
Krutul D., Zawadzki J., Kazem-Bek D., Radomski A., Hrols J.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2005
|
tom 56
7

Some physical and mechanical properties of birch (Betula pendula Roth.) wood growing in Latvia

88%
Pushinskis V., Mionchinskis U., Tuherm H., Hrols J., Dolacis J.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2003
|
tom 53
8

Some morphological and physical characteristics of wild cherry wood growing in Latvia

88%
Dolacis J., Daugaviete M., Alksne A., Hrols J., Pavlovics G.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2004
|
tom 55
The present work summarizes the literature data on both the fast growing species of wild cherry or crab cherry (Cerasus avium L.) Moench syn. Prunus avium L.), and the cultivation of wood in plantations as well as the basic physico-mechanical characteristics of this species' wood. Wild cherry wood is valued high on the world's market owing to its technological and mechanical properties: elasticity, not too high hardness, easy processability, good polishing characteristics, easy mordanting and lacquering, similar mechanical properties of both the heartwood and sapwood parts of the stem. Besides, the wood has an expressive and interesting structure, owing to which it is widely used for the production of furniture, plywood, decorative face veneer, wooden floorings, parquet, souvenirs, sports articles, caskets, domestic goods, etc. Data on the results of wild cherry stands inventory in the Kurzeme and Zemgale regions of Latvia with the aim of selecting promising taxons are summarized. Data on the growth of seedlings in plantations of 1997 it the Liepaja, Kuldiga and Gulbene regions of Latvia are summarized. The studies testify that the cultivation of wild cherry for obtaining decorative wood in plantations of the southern, south-western and middle regions of Latvia is promising. Physico-mechanical characteristics for both the heartwood and sapwood parts of the stem are presented, which show that the strength characteristics of the heartwood part of the stem are higher than in the case of sapwood.
9

Combustion heat of pinewood depending on moisture

88%
Tomsons E., Dolacis J., Hrols J., Turlajs D., Lalik V.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2004
|
tom 55
Wood as a fuel is an environmentally friendly energy resource. In the future, wood as a Latvian local fuel should be regarded as one of economically attractive energy resources owing to the dramatic decrease in the imported fossil fuel (oil and natural gas). At present, from the volume of wood felled in Latvia, 3.2-3.5 million m3 is used per year as a fuel wood. From the volume of felled wood, pine comprises 30.1%. Wood is used for heating in the form of firewood, chips, briquettes, pellets, shavings, etc. at different moisture contents. The paper presents rated density, as well as the amounts of combustion mass and volume (lowest and highest) heat depending on the wood moisture content.
10

Comparison of soil treatment methods in sludge-fertilized energy wood plantations in former agricultural soils

88%
Kaposts V., Lazdina D., Karnisch Z., Hrols J., Dolacis J.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2005
|
tom 56
11

Dependence of the optical properties on moisture content for birch (Betula pendula Roth.) wood at the variable temperature and constant time of hydrothermal treatment

88%
Dolacis J., Hrols J., Tuherm H., Skuditis J., Ziverts A.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2003
|
tom 53
12

Radiomonitoring of Ignalina NPP neighbouring forest pine and spruce wood

88%
Hrols J., Skujina A., Dolacis J., Armolaitis K., Blaho J.
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
|
2008
|
tom 65
13

Analytical calculation of spectral optical and thermoradiation charakteristics of the plane layer of wood

88%
Dolacis J., Iljasov S., Hrols J., Pavlovics G., Antons A.
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
|
2007
|
tom 61
14

Dependence of the optical properties of birch wood on moisture content at the constant temperature of hydrothermal treatment and time

76%
Dolacis J., Hrols J., Skuditis J., Ziverts A., Ktutul D., Kazem-Bek D.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2004
|
tom 55
The exploration of the sales market of furniture and other domestic goods both from solid wood and veneer shows that consumers currently prefer articles from wood with a definite brightness, i.e. lighter hues. This factor is of great importance for veneer production as well as the manufacture of wood boards, with their subsequent veneering. To investigate the possibilities to increase brightness, it is of interest to study the optical properties (mainly reflection capacity L*) of wood in the visible range of the electromagnetic spectrum, depending on the regimes of its hydrothermal treatment, i.e. water temperature and steam treatment time. It has been shown that hydrothermal treatment influences the brightness of Silver birch (Betula pendula Roth.).
15

Dependence of the physico-mechanical and anatomic characteristics on the stem height for wood of wild cherry (Prunus avium L.) grown in Latvia

76%
Dolacis J., Daugaviete M., Hrols J., Pavlovics G., Alksne A., Cirule D.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2005
|
tom 56
16

Changes in the optical properties of brich plywood depending on the drying temperature and storing time prior to drying

76%
Dolacis J., Hrols J., Antons A., Feldmanis I., Krutul D., Kazem-Bek D.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2006
|
tom 58
17

Comparison of the physical and mechanical properties of the wood of wild cherry (Prunus avium L.) and birch (Betula pendula Roth.) grown in Latvia

76%
Pavlovics G., Dolacis J., Daugaviete M., Hrols J., Alksne A., Cirule D.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2006
|
tom 59
18

Dependence of the optical properties of birch wood veneer on hydrothermal treatment conditions

76%
Dolacis J., Hrols J., Antons A., Feldmanis I., Krutul D., Kazem-Bek D.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2005
|
tom 56
19

Morphological and physical properties of Norway spruce (Picea abies Karst.) wood growing in Latvia

76%
Balode V., Cirule D., Dolacis J., Hrols J., Krutul D., Kazem-Bek D.
Annals of Warsaw Agricultural University. Forestry and Wood Technology
|
2004
|
tom 55
For the first time, generalized data on the physical properties of Norway spruce (Picea abies Karst.) growing in Latvia, i.e. density, shrinkage, swelling in water is presented. It has been found that, in Latvian conditions, the physical properties of spruce wood do not depend on the separate regions of growth. The forest types - dry, reclaimed and wet forests play a more important part.
Pierwsza strona wyników Pięć stron wyników wstecz Poprzednia strona wyników Strona / 1 Następna strona wyników Pięć stron wyników wprzód Ostatnia strona wyników
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.