Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 14

Liczba wyników na stronie
Pierwsza strona wyników Pięć stron wyników wstecz Poprzednia strona wyników Strona / 1 Następna strona wyników Pięć stron wyników wprzód Ostatnia strona wyników

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych:  decolourization
help Sortuj według:

help Ogranicz wyniki do:
Pierwsza strona wyników Pięć stron wyników wstecz Poprzednia strona wyników Strona / 1 Następna strona wyników Pięć stron wyników wprzód Ostatnia strona wyników
Textile industries consume substantial volumes of water and chemicals for wet processing of textiles. Effluent discharge from textile industries to neighbouring water bodies and wastewater treatment systems is currently causing significant health concerns. Chemically enhanced primary treatment (CEPT) involves the use of chemical coagulants to enhance the coagulation or flocculation of wastewater particles. The chemicals of aluminum sulphate (alum), ferric chloride (FeCl₃) and cationic polymer were studied by jar test to select the most suitable coagulant for effective treatment of textile industrial effluents. The results showed that the optimum dosage for the removal of 75% of colour, 64% turbidity and 69% of chemical oxygen demand (COD) was 300 ppm of alum after pH adjustment at pH = 7.2. An experiment further revealed that the addition of 300 mg l⁻¹ of alum and 1 mg l⁻¹ of polymer could provide a reduction of colour, turbidity, COD and phosphorous higher than 95%, 75%, 76% and 90%, respectively. The experimental results confirmed that CEPT can be adopted as a decolorization of textile industrial effluents. Moreover, it can improve sludge setting and dehydration properties, and decrease the treatment cost.
Wywar melasowy buraczany jest to produkt odpadowy otrzymywany w gorzelniach podczas produkcji etanolu z melasy buraczanej. Ze względu na wysoką wartość ChZT oraz związków barwnych (melanoidyn, karmeli oraz produktów alkalicznego rozkładu inwertu) jest on wysoce niebezpieczny dla środowiska. Celem badań było określenie wpływu stężenia wywaru, dodatku ekstraktu drożdżowego, KH2PO4, (NH4)2SO4 oraz glukozy na stopień dekoloryzacji wywaru melasowego buraczanego przy udziale bakterii Lactobacillus casei 0848 z wykorzystaniem dwuwartościowego planu frakcyjnego. Hodowle bakterii prowadzono na wytrząsarce rotacyjnej przy 120 obrotach·min-1 w temp. 37°C przez 96 godzin, w kolbach stożkowych o poj. 250 cm3 zawierających 100 cm3 podłoża hodowlanego o składzie wynikającym z planu eksperymentu (wartości minimalne i maksymalne): stężenie wywaru (25 i 100%), ekstrakt drożdżowy (0,5 i 5 g· dm-3), KH2PO4 (0 i 2 g· dm-3), (NH4)2SO4 (0 i 2 g·dm-3) oraz glukoza (5 i 50 g· dm-3). Eksperymenty wykonano w dwóch powtórzeniach dla każdego z wariantów doświadczenia. Stopień dekoloryzacji wywaru oznaczano spektrofotometrycznie (475 nm). Odnotowano dobre dopasowanie przyjętego planu eksperymentu (R2 = 0,9891). Stwierdzono istotnie statystyczny wpływ (p ≤ 0,05) minimalnego i maksymalnego stężenia wywaru, glukozy i (NH4)2SO4 na proces dekoloryzacji. Najwyższy uzyskany stopień dekoloryzacji wywaru wynosił 24,78%.
The aim of this work was to evaluate the capability of Phormidium valderianum BDU 140441 on biodegradation and decolorization of distillery spent wash. The effect of initial pH (6-10), temperature (24- 32ºC), and light intensity (20-54 W/m2) was studied using single factorial design and achieved a maximum decolorization of 74.5% with COD reduction of 83.48%. A 23 full factorial experimental central composite design (CCD) of response surface methodology (RSM) was used to investigate the interaction effect between these variables and the optimal values. The predicted results showed that a maximum decolorization of 85.5% and COD reduction of 87.29% was achieved under the optimum conditions of 8 pH, 30ºC, and light intensity of 36 W/m2. It was observed that model predictions were in good agreement with experimental values (R2 = 0.9830, Adj-R2 = 0.9677), which indicated the suitability of the model and the success of the optimization tool. A non-linear artificial neural network (ANN) model was developed to predict the biological decolorization of the spent wash. The results indicated that ANN revealed reasonable performance (R2=0.9999, y=0.9781x-0.5679).
Process conditions (dye concentration, pH and oxidant dose) were optimized for UV, O₃, H₂O₂/UV, O₃/UV, H₂O₂/O₃, and H₂O₂/O₃/UV to treat Red Cl-5B dye of varying concentrations (100, 300, and 500 mg/L). Ozonation resulted in color removal of more than 90%, whereas H₂O₂/O3 showed no advantage over the O₃ alone. However, H₂O₂/UV was found to be very suitable as it gave almost 100% decolorization in a relatively short reaction time. Decolorization rate for all processes was reduced to half when the dye concentration was increased from 100 to 300 mg/l. Comparative study of rate constants revealed that H₂O₂/UV is four times faster than that of UV alone. On the other hand O₃/H₂O₂ is three to four times slower than O₃ alone.
A novel modified Fenton process using heterogeneous catalyst (swarf) was developed to catalyze the oxidation reaction of azo dye Acid Red 18. It was found that swarf could be used to replace iron salts as a catalyst for the Fenton reaction. The examined continuous Fenton process proved to be very efficient for decolorization of simulated wastewater containing 100 mg/dm³ Acid Red 18. Performance of the Fenton reactor and regeneration method of the catalyst was discussed. The simplified mechanism of hydroxyl radical production in the presence of swarf as a catalyst also was proposed.
The color of sugar beet molasses vinasse is produced mainly by melanoidins (from Maillard reaction of sugars (carbohydrates) with proteins (amino groups)), caramels (from overheated sugars), and invert degradation products of alkaline hydrolysis. The aim of this study was to remove colorants from vinasse using lactic acid bacteria (Lactobacillus coryniformis, Lactobacillus sakei, Lactobacillus plantanim, Weisella soli, Pediococcus parvulus, and Pediococcus pentosaceus). The highest color removal was obtained with L. plantarum (44%). The highest reduction in melanoidins and invert degradation products was observed with P. parvulus (38% and 36%, respectively). The colorants underwent biotransformation. No correlation was found between color removal and COD reduction.
Buraczany wywar melasowy jest produktem ubocznym powstającym podczas wytwarzania etanolu z melasy buraczanej. Jego ciemnobrązowa barwa jest efektem obecności karmeli, melanoidyn oraz produktów alkalicznej degradacji inwertu. Ciemno-brązowe zabarwienie wywaru nie jest usuwane metodami biologicznymi. Celem prezentowanych badań było porównanie zdolności i wydajności dekoloryzacji buraczanego wywaru melasowego na złożu glinki haloizytowej z wynikami uzyskanymi na złożach pylistego węgla aktywnego. Zbadano wpływ pH i stężenia wywaru, czasu reakcji z nośnikiem oraz ilości badanego złoża sorpcyjnego na skuteczność odbarwiania wywaru melasowego.
Acinetobacter baumannii, Corynebacterium sp., Cytophaga columnaris, Escherichia coli, Pseudomonas fluorescens, and P. luteola bacteria isolated from the sewage disposal lake in Jeddah, Saudi Arabia, can decolorize crystal violet (CV). P. fluorescens was the most potent CV decolorizer, and Corynebacterium sp. was also able to perform this function. Five different media were tested to determine which medium formulation favoured CV decolorization by P. fluorescens and Corynebacterium sp. The basal medium favoured the highest decolorization percentage of 50 μg CV/ml after 72 h of incubation. P. fluorescens was sufficient to decolorize concentrations of CV up to 150 μg/ml after 92 h of incubation. A mixed bacterial culture of P. fluorescens and Corynebacterium sp. more fully decolorized CV than did a single; the decolorization period for the mixed culture was reduced by more than 37% and the decolorization rate (μg/h) increased by up to 59%. Two-phase multifactorial optimization statistical analysis (Plackett-Burman and BoxBehnken) were carried out to optimize culture conditions in order to increase the ability of a mixed culture to decolorize 150 μg CV/ml. Under the optimized conditions the decolorization period was reduced by more than 22% and the decolorization rate was increased by more than 48%. Crystal violet can be efficiently decolorized by P. fluorescens and Corynebacterium sp. The decolorization process is markedly influenced by the composition of the cultivation medium and the concentration of CV. A mixed culture of P. fluorescens and Corynebacterium sp. was much more efficient at decolorizing CV than was a monoculture. The culture conditions were considerably optimized using Plackett-Burman and BoxBehnken statistical experimental designs.
Buraczany wywar melasowy, produkt uboczny przemysłu gorzelniczego, charakteryzuje ciemnobrunatna barwa, za którą odpowiadają melanoidyny, karmele oraz produkty alkalicznego rozkładu inwertu. Celem badań było określenie wpływu dodatku ekstraktu drożdżowego i stężenia wywaru na stopień jego dekoloryzacji w hodowli bakterii fermentacji mlekowej Pediococcus parvulus MiLab099. Zastosowano kompozycyjny plan rotatabilny (N = 2, α= 1,4142, N = 10). Hodowlę prowadzono metodą wstrząsarkową (120 obr.· min-1) w kolbach stożkowych (250 cm3), które zawierały 100 cm3 podłoża o składzie wynikającym z planu eksperymentu: stężenie wywaru od 7,57 do 92,43% oraz dodatek ekstraktu drożdżowego (YE) od 0,17 do 5,83 g·dm-3. Inokulum dodawano w ilości 1 cm3. Efektywność dekoloryzacji wywaru oceniano spektrofotometrycznie (475 nm). Stopień usunięcia kolorantów oznaczano metodą Iwanowa-Sapronowa. Dla większości wariantów stopień dekoloryzacji wywaru nie przekroczył 10%, a maksymalna wartość wyniosła ok. 21%. Statystycznie istotny wpływ (p ≤ 0,05) na stopień dekoloryzacji wywaru miało jego stężenie, zaś nieistotny statystycznie okazał się dodatek YE.
The effect of chitin preparation with HCl (chitin A) and with HCl and KOH (chitin B) and pH on the adsorption of reactive dyes (helactine, polactine and remazol) on chitin was investigated. The double Lang- muir equation was appropriate to analyze the dependence between amount of the adsorbed dye on chitin (Q) and its equilibrium concentration (C). It indicated the presence of two types of active sites which differed in both the maximum adsorption capacity (b) and adsorption affinity (K). Based on the dimensionless separa­tion factor R it was found that the dye adsorption mechanism in type I sites was an ion exchange, whereas in the case of type II sites it was a physical adsorption. The adsorption capacity of the chitin A (deacetylation degree of 3%) for samples without pH adjustment ranged from 29 (Red D-8B) to 67 mg/g dry weight of chitin (Gelb GR). At pH 3.0 the adsorption capacity was higher from 1.9 to 2.3-fold. The most favourable effect of pH change was found for helactine dyes. The adsorption capacity of the chitin B (deacetylation degree of 5%) was from 66 (Brillantorange 3R) to 101 mg/g dry weight of chitin (Gelb GR). After pH adjustment to pH 3.0 the adsorption capacity ranged from 160 (Ruby F-2B) to 294 mg/g dry weight of chitin (Blau 3R). The most favourable effect of deacety- lation degree increase was found in the case of helactine dyes in the samples without pH adjustment, and polactine and remazol dyes at pH 3.0.
Pierwsza strona wyników Pięć stron wyników wstecz Poprzednia strona wyników Strona / 1 Następna strona wyników Pięć stron wyników wprzód Ostatnia strona wyników
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.