The method for the determination of Sr microamounts in milk by flame atomic absorption spectrometry (FAAS) is suggested. The main characteristics for the determination of this metal have been optimized and investigated: optimum air and gas pressure; the influence of hydrochloric acid and an effect of time on the absorbance of strontium. The selectivity of the determination of strontium was also investigated. The limiting interfering Sr/M ratios (the determination error ±10%) have been estimated. The suggested technique is simple, fast, accurate and selective.
The relative permittivity of water decreases with increasing temperature. Therefore, it is likely that the soil water content determined with time domain reflectometry (TDR) is influenced by temperature. We derived a correction based on a refractive mixing model. Our field experiment on a peat soil and laboratory experiments on disturbed sand and loam samples showed that there exist significant temperature effects. The magnitude of these effects is a function of water content and temperature. Both the refractive mixing model-based correction and Ledieu’s correction compensated temperature effects reasonable well. We recommend Ledieu’s correction for its simplicity: only information of the soil temperature is needed to correct the measured water content. The model-based correction needs additional information of the TDR calibration function. Our laboratory experiments on disturbed clay samples however, did not show a temperature effect. We suggest that the electrical conductivity counteracts the temperature effects in clay.
The fundamental information for selecting and designing the most efficient treatment method of hospital waste is obtained by means of waste composition analysis. Therefore, the aim of this study was to evaluate the physical and elemental composition of waste in four hospitals in Sivas, Turkey. The results should help us select and design proper waste disposal. During the study period it was estimated that the daily waste generation rate of four hospitals was 985 kg/day, projected to be 1267 kg/day in 2015. Furthermore, analysis indicated that the moisture content of wastes was 14,2 %. The four hospital wastes consist of 92% combustible wastes and 8% noncombustible wastes by mass. The combustible wastes constitute paper (16%), textiles (10,2%), cardboard (4%), plastics (41,2%) and food waste (17%). Since the ratio of combustible waste is high, the incineration method has been suggested as a proper disposal method.
There was developed a little-work-consuming and non-expensive microdiffu- sion method of carboxyhaemoglobin determination in bloody in low range concentration. It can be used in the assessment of passive smokers' exposure to carbon monoxide. The amount of blood neccessary for the determination was 0.15 ml. An average precision of the developed method of the carbon monoxide determination (converting into HbCO) for the concentration ranged from 1 to 5%, from 3 to 12% and from 5 to 20% was respectively 5.96, 4.09 and 2.14.
Determination of polynuclear aromatic hydrocarbons (PAH-s) in sewage sludges is necessary before utilizing the sludges in agriculture, especially in industrial regions. Separation of PAHs has been the most difficult step of analysis. In this work, PAHs were separated by extraction. The best extraction solvents were chosen after reviewing literature. A new method of determining the partition coefficient has been proposed and applied to check if the chosen solvents were good enough for the present purposes. The results have shown that in the case of methanol and dimethylfor- mamide, extraction was nearly complete but the problems of finding a better solvent and mixing the solvents remained.
Flow-through coulometry was used for the determination of arsenic in soil extracts in 2 mol.dm-3 HCl solution. Arsenic(III) species were deposited on gold plated porous working electrodes and then galvanostatically stripped. The procedure was optimized and possible interferences were identified. The total As content was determined after a reduction step in a microwave oven with hydrazine hydrochloride. The detection limit was found to be 0.15 µg·dm-3 in the analyzed solution. A linear response range was achieved up to As concentrations of several mg·dm-3. The procedure was applied for the analysis of soil extract samples from three localities in Slovakia.
Some chromatographic methods (RP-HPLC) for analyses of different ionic liquids have been developed. The determination methods were suitable for the study of biodegradation of these substances.
Background. Peptides are important components of foods mainly due to their biological activity. The basic method of their identification is reversed phase high-performance liquid chromatography coupled with electrospray-ionization mass spectrometry (RP-HPLC- -ESI-MS). Retention time (tR) prediction in silico is very helpful in analysis of multicomponent peptide mixtures. One of problems associated with RP-HPLC-ESI-MS is deterioration of mass spectra quality by trifluoroacetic acid (TFA). This problem can be avoided through the use of chromatographic columns designed for work with low TFA concentrations in mobile phase. The objective of this study was to determine the correlations between peptide retention times predicted with the use of a program available on-line and experimental retention times obtained using the column working with low TFA concentrations. Material and methods. The set of synthetic peptides and bovine α-lactalbumin fragments (18 peptides) was used in the experiment. Theoretical retention times were calculated using Sequence Specific Retention Calculator (SSRC) program. The experimental retention times were measured via RP-HPLC-ESI-MS method using column working with low TFA content. The dependence between theoretical and experimental tR was expressed via empirical equations. Results. The best correlation between theoretical and experimental retention times of peptides containing at least four amino acid residues has been obtained when third order polynomial (R2 = 0.9536). Prediction quality for diand tripeptides was significantly lower. The method described can be applied for cysteine-containing peptides although our sample preparation procedure did not include modification of this amino acid, taken into attention by SSRC program. Conclusions. The results of this study validate the usefulness of a third degree polynomial as a simple function describing the correlation between peptide retention times predicted by an on-line application and experimental retention times. The above function can effectively predict retention times in situations when experimental conditions differ from the computational environment (various columns, mobile phase composition, use or resignation from chemical modifications during sample preparation, various HPLC equipments). On-line available tR predicting application with correction based on user’s own data may be a useful tool in food peptidomics.