Correlation of plastic forming and structure formation parameters in powder materials

• Autorzy: Ryabicheva L. , Usatyuk D. , Nikitin Y.

Warianty tytułu

RU

Vzaimosvjaz' parametrov plasticheskogo deformirovanija i strukturoobrazovanija v poroshkovykh materialakh

• Języki publikacji: EN

Abstrakty

EN

RU

Słowa kluczowe

EN

mathematical model; recovery; recrystallization; polygonization; deformation parameter; axial stress logarithm; activation energy; softening; plastic forming; powder material; theoretical analysis

• Wydawca: -
• Czasopismo: Teka Komisji Motoryzacji i Energetyki Rolnictwa
• Rocznik: 2014
• Tom: 14
• Numer: 4
• Opis fizyczny: p.151-159,fig.,ref.

Twórcy

autor

Ryabicheva L.

• Chair of Material Science, Department of Engineering Mechanics, Volodymyr Dahl East Ukrainian National University, Molodizhny bl. 20a, Lugansk, 91034, Ukraine

autor

Usatyuk D.

• Chair of Material Science, Department of Engineering Mechanics, Volodymyr Dahl East Ukrainian National University, Molodizhny bl. 20a, Lugansk, 91034, Ukraine

autor

Nikitin Y.

• Chair of Material Science, Department of Engineering Mechanics, Volodymyr Dahl East Ukrainian National University, Molodizhny bl. 20a, Lugansk, 91034, Ukraine

Bibliografia

• 1. Pirowski Z., Gościański M., 2013.: Casting alloys for agricultural tools operating under the harsh conditions of abrasive wear, TEKA. Commission of Motorization and Energetics in Agriculture, Vol. 13, No. 1, pp. 119-126.
• 2. Gromenko, V., Krivonosov, S. and Snizhko A., 2012.: X-RAY Structural Research of Products of Cavitational Erosion of Metals, TEKA. Commission of Motorization and Energetics in Agriculture, - 2012, Vol. 12, No.3,pp. 41-45.
• 3. Abbod M.F., Sellars C.M., Cizek P., Linkens D.A. and Mahfouf M., 2003.: Modelling the Flow Behaviour, Recrystallization and Crystallographic Texture in Hot Deformed Fe-30 wt.% Ni Austenite, Acta Mater, No. 51, pp. 5051-5062.
• 4. Luton M.J., Sellars C.M., 1969.: Dynamic Recrystallization in Nickel and Nickel-Iron Alloys During High Temperature Deformation, Acta Matallurgica, Vol. 17, pp. 1033-1043.
• 5. Elwazri A.M., Essadiqi E., Yue S., 2004.: Kinetics of Metadynamic Recrystallization in Microal-loyed Hypereutectoid Steels, ISIJ International, Vol. 44, No 4, pp. 744-752.
• 6. Poliak E.I., Jones J.J., 2003. Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation, ISIJ International, Vol. 43, No. 5, pp. 684-691.
• 7. Ryabicheva L.A., 1998.: The Phenomenological Approach to Estimation of Structure by Macroscopic Parameters of the, Izvestija vuzov, Ferrous Metallurgy, No. 7, pp. 26-30. (in Russian)
• 8. Meyers M.A., Lasalvia J.C., Nestorenko V.F., Chen Y.J. and Kad B.K., 1996.: Dynamic Recrystallization in High Stain Rate Deformation Processing of ReX'96, the Third International Conference on Recrystallization and Related Phenomena, pp. 279-286.
• 9. Ryabicheva L.A., 1996.: The Bitmap control of structure formation processes at hot stamping, East-Ukrainian State University, Luhansk. (in Russian)
• 10. Bardi F., Cabibbo M., Evangelista E., Sipgarel-li S. and Vukcevic M., 2003.: An analysis of hot deformation of an Al-Cu-Mg alloy produced by powder metallurgy, Materials Science and Engineering A, Vol. 339, No 1-2, pp. 43-52.
• 11. Zouhar G., 1974.: Beurteilung der Erholungs- und Rekristallisationsneigung der Stähle bei der Warmformgebung mit Hilfe des Warmtorsionsversuchs, Neue Hütte, No 7, pp. 418-423. (in German)
• 12.Leshhinskij V.M., Ryabicheva L.A., 1997.: Simulation of the dynamic recrystallization process, Metallovedenie i termoobrabotka, No. 1, pp. 9-11. (in Russian)
• 13. Shtern M.B., 1989.: A model of the processes of deformation of compressible materials with an allowance made for pore formation II. Uniaxial tension and compression of porous bodies, Powder Metallurgy and Metal Ceramics, Vol. 28, Issue 6, pp. 446-451.
• 14. Frost H.J., Ashby M.F., 1982.: Deformation-Mechanism Maps, Pergamon Press.
• 15. Gaponova O., Ryabicheva L., 2008. Deforming of the Copper-Titanium Powder Materials at Elevated Temperatures, International Conference Deformation and fracture in structural PM materials” DF PM 2008 Proceedings, Stara Lesna, High Tatras, Slovak Republic, pp. 202-206.
• 16. Haessner F., 1978.: Recrystallization of metallic materials, Shtuttgart, Dr Riederer Verlag GmbH.
• 17. Kolerov O.K., 1973.: Characteristics of primary recrystallization and its role in the sintering of metal powders, Powder Metallurgy and Metal Ceramics, Vol. 12, Issue 3, pp. 192-195.
• 18. Lawson C.L., Hanson R.J., 1974: Solving Least Squares Problems, Prentice-Hall.
• 19. Soffa W.A., Laughlin D.E., 2004.: High-strength age hardening copper-titanium alloys: redivivus, Progress in Materials Science, No. 49, pp. 347366.
• 20. McLean D., 1957.: Grain Boundaries in Metals, Oxford University Press, London.
• 21. Beljaev S.P., Lihachev V.A., Myshljaev M.M. and Sen'kov O.N., 1981.: Dynamic recrystallization of aluminium, Physics of Metals and Metallography, Vol.52, No3, pp. 617-626. (in Russian)
• 22. Gorelik S.S., 1978.: Recrystallization of metals and alloys, Moscow, Metallurgy. (in Russian)
• 23. McDonald D.T., Humphreys F.J., Bate P.S., 2007.: Microstructure and texture of dynamically recrystallized copper and copper - tin alloys, Materials Science Forum, Vol. 550, pp. 393-398.
• 24. Kapyrin G.I., 1977.: Titanium alloys in machine building, Leningrad, Mashinostroenie. (in Russian)