3D-modeling of the rotary table for tool SVM1F4 with non - clearance worm gearing

• Autorzy: Krol O. , Shevchenko S. , Sukhorutchenko I. , Lysenko A.

Warianty tytułu

RU

3D- modelirovanie povorotnogo stola stanka modeli SVM1F4 bezzazornojj chervjachnojj peredachejj

• Języki publikacji: EN

Abstrakty

EN

RU

Słowa kluczowe

EN

rotary table; worm gearing; kinematics; geometry; 3D modelling; SVM1F4 model; technological operation

• Wydawca: -
• Czasopismo: Teka Komisji Motoryzacji i Energetyki Rolnictwa
• Rocznik: 2014
• Tom: 14
• Numer: 1
• Opis fizyczny: p.126-133,fig.,ref.

Twórcy

autor

Krol O.

• Volodymyr Dahl East-Ukrainian National University, Molodizhny bl., 20a, Lugansk, 91034, Ukraine

autor

Shevchenko S.

• Volodymyr Dahl East-Ukrainian National University, Molodizhny bl., 20a, Lugansk, 91034, Ukraine

autor

Sukhorutchenko I.

• Volodymyr Dahl East-Ukrainian National University, Molodizhny bl., 20a, Lugansk, 91034, Ukraine

autor

Lysenko A.

• Volodymyr Dahl East-Ukrainian National University, Molodizhny bl., 20a, Lugansk, 91034, Ukraine

Bibliografia

• 1. Averyanov O.I., 1987.: Module principle of the building tool with NC. – M.: Machine building, 232. (in Russian).
• 2. Bernackiy I.P., 1965.: The Study of the worm gearing raised load rating with convolute worm to new variety //Tr. Leningr. politehn. in-t. – Leningrad: 42-53. (in Russian).
• 3. Bushuev V.V., 1992.: Bases of design tools. M.: , Stankin, 520. (in Russian).
• 4. Bushuev V.V., Eremin A.A., Kakoilo A.A., 2012.: Machine tool: Book. Is.1. – M.: , Machine building, 608. (in Russian).
• 5. Ganin N.B., 2011.: Designing and calculation of strength in system KOMPAS-3D V13. – M.: DMK, 320. (in Russian).
• 6. Ganin N.B., 2012.: Three-dimensional designing in KOMPAS-3D. – M.: DMK, 776. (in Russian).
• 7. Gerasimov B.K., Komkov V.N., 1983.: Load ability and efficiency worm gearing with localized by tooth-contact pattern // Tr. Leningr. politehn. in-ta. – Ltningrad: 41-44. (in Russian).
• 8. Krol O.S., Shevchenko S.V., Sokolov V.I., 2012.: Designing machine tool in surrounding APM WinMachine: Book. Lugansk,. The East- Ukrainian National University named after V.Dahl, 400. (in Russian).
• 9. Litvin F.L., 1962.: New types cylindrical worm gearing. – Moscow -Leningrad: Mashgiz, 103. (in Russian).
• 10. Litvin F.L., 1968.: Theory tooth system. – M.: Science, 584. (in Russian).
• 11. Litvin F.L., Bernackiy I.P.,1976.: The determination and exception of the disadvantage zones of the tooth system in cylindrical worm gearing //Vestn. Mashinostroeniya: 14-16. (in Russian).
• 12. Maznev E.A., 2010.: Increasing load abilities of the cylindrical worm gearing by using convexocon profile wrap// dis. Cand. tehn. sciences: 05.02.02, Lugansk: 289. (in Russian).
• 13. Niemann G., Heyer E., 1953.: Untersuchungen an Schneckengetrieben, VDI, № 6, 1953.
• 14. Parubec V.I., 1985.:The Analysis and syntheses of the worm gearing with operated by contact, localized in given zone //dis. kand. tehn. Sciences: 05.02.02, Kiev: 233. (in Russian).
• 15. Pronikov A.S., Borisov E. I., 1995.: Designing machine tool and machine systems: Reference book-textbook. In 3-h part. Is. 2. P. 1. Calculation and Designing nodes and element tool. – М.: Machine building, 371. (in Russian).
• 16. Sokolov V., Azarenko N., Sokolova Ya., 2012.: Simulation of the power unit of the automatic electrohydraulic drive with volume regulation // TEKA Commisionof Motorization and Energetic in Agriculture. – Vol.12. – № 4. – Lublin, Poland: 268-273. (in Russian).
• 17. SokolovaYa., Tavanuk T., Greshnoy D., Sokolov V., 2011.: Linear modeling of the electrohydraulic watching drive // TEKA Kom. Mot.I Energ.Roln. – OL PAN, XIB, Lublin, Poland: 167-176. (in Russian).
• 18. Shelofast V.V., 2004.: Bases of the designing machine. – М.: APM, 472. (in Russian).
• 19. Shevchenko S.V., 1974.: To choice parameter concave profile worm //Izv. Vuzov. Mashinostroenie. № 2. – M.: 79-83. (in Russian).
• 20. Shevchenko S.V., 2010.: The localization of the contact in worm tooth system on the base standard element gearing // Lifting-transport technique. – Dnepropetrovsk: 49-55. (in Russian).
• 21. Taratynov O.V., 2002.: Designing and calculation machine tool on computer. – М.: MGIU, 384. (in Russian).
• 22. Ufert O., 1961.: Dynamische Drefhehlermessungen an Walzerfrasmaschinen undihr Einfluss auf die Genauigkeit gefraster Grobgetrieberader, VDI, № 103.
• 23. Verhovskiy A.V., 1978.: The Study of the conditions of the working the worm gearing with cloused line of the contact //dis. kand. tehn. Science. – M.: 269. (in Russian).
• 24. Zamriy A.A., 2008.: Practical scholastic course CAD/CAE systems APM WinMachine. –M.: APM, 144. (in Russian).