Analysis and experiments of embedded gripping mechanism used in large-scale tools holding up pile foundation in ocean

• Autorzy: Wang Z. , Zhang B. , Wang T.
• Języki publikacji: EN

Abstrakty

EN

With the rapid development of the marine economy and continuous improvement of the industry, the scale of the offshore engineering is increasing. This raises interest in studying, theoretically and experimentally, gripping and bearing mechanisms for large-scale holding and lifting tools used in foundation pile installations. In this paper, the embedded gripping mechanism is studied based on the theory of elastic-plastic mechanics. The embedded and bearing performance of the tooth is simulated and the influence factors are studied. In addition, the device used in the simplified embedded experiment on the tooth of the embedded block is designed. The relationship between embedded depth, load, and tooth profile angle is identified and validated. Meanwhile, the embedded performance of linear and ring type teeth is compared experimentally in order to select the suitable type of tooth for various situations. This comparison makes the basis for designing an upending gripper for the marine pile foundation, which can realize the operation of holding the pile to prevent its falling

• Wydawca: -
• Czasopismo: Polish Maritime Research
• Rocznik: 2019
• Tom: 26
• Numer: 3
• Opis fizyczny: p.15-21,fig.,ref.

Twórcy

autor

Wang Z.

• Harbin Engineering University, Road Nantong 145, District Nangang, 150001 Harbin, China

autor

Zhang B.

• Harbin Engineering University, Road Nantong 145, District Nangang, 150001 Harbin, China

autor

Wang T.

• Harbin Engineering University, Road Nantong 145, District Nangang, 150001 Harbin, China

Bibliografia

• 1. Sarkar, A., Gudmestad, O. T. Installation of monopiles for offshore wind turbines – by using end-caps and a subsea holding structure. ASME 2011 International Conference on Ocean, Offshore and Arctic Engineering, 2011: 309–315.
• 2. Sarkar, A., Gudmestad, O. T. Study on a new method for installing a monopile and a fully integrated offshore wind turbine structure. Marine Structures, 2013, 33(10): 160–187
• 3. Hezarjaribi, M., Bahaari, M. R., Bagheri, V., et al. Sensitivity analysis of jacket-type offshore platforms under extreme waves. Journal of Constructional Steel Research, 2013, 83: 147–155.
• 4. Wang, W., Yang, M., Review and discussion on key technologies in foundation design of offshore wind power, Journal of Hydroelectric Engineering, 2012,31(06): 242–248.
• 5. Natskår, A., Moan, T., Alvær, P. Uncertainty in forecasted environmental conditions for reliability analyses of marine operations. Ocean Engineering, 2015, 108(2): 636-647.
• 6. http://www.knudehansen.com/references/offshore- offshore-wind-vessels/mono-pile-upending-trolley/.2017.
• 7. http://www.ihchs.com/wind/deck-equipment/pile-guiding- and-positioning-frame/.2017.
• 8. Sun, Z. J., Meng, Q.X., Zhou, D. Contact finite element analysis of the pressing block tooth in underwater skirt pile gripper of offshore oil platform. Machinery, 2006, (12): 1–4.
• 9. Sun, Z. J., Meng, Q.X., Zhou, D. Structure optimization of the pressing block tooth in underwater skirt pile gripper of offshore oil platform. Machine Design and Research, 2006, (06): 102–105.
• 10. Sun, Z.J., Meng, Q.X., Zhou, D. Contact nonlinear finite element analysis on the pressing block tooth in underwater skirt pile gripper. Journal of Petrochemical Universities, 2006, (03): 72–75.
• 11. Liang, F.H., Yan, X.G., Zheng, W. Mechanical analysis of jacket pile gripper and choice of the number of hydraulic pressure vats. The Ocean Engineering, 2007, (01): 82–87.
• 12. Jiang, Y.C., Tian, Y.F., Yang, S.G., The skirt pile gripper design of jacket platform. China Offshore Platform, 2008, (05): 19–22+26.
• 13. Li, H.L., Yu, W.T., Wang, L.Q., et al. Experimental research on clamping block of underwater leveling equipment. China Offshore Oil and Gas, 2009, (01): 57–60.
• 14. Jiang, P.R., Fang, X.M. Analysis and experimental study grip function of an underwater skirt the gripper. Journal of Harbin Engineering University, 2011, (09): 1228–1232.
• 15. Li, T.Q. Research of unilateral clamping lifting tool of great steel tube stake at sea. Modern Manufacturing Engineering, 2013, (08): 79-82+59.
• 16. Mulderij, K. J. Pile upending device: WO, WO/2014/ 084738[P], 2014.
• 17. Stefan, A., Constantin, D., Grigore, L. S. Aspects of kinematics and dynamics of a gripping mechanism. Electronics, Computers and Artificial Intelligence (ECAI), 7th International Conference on, 2015: WF-1-WF-4.

Identyfikatory

DOI

10.2478/pomr-2019-0041