Modelling and optimisation of vacuum collection system for cruise ship kitchen garbage

• Autorzy: Du J. , Li R. , Wu X. , Zhao H.
• Języki publikacji: EN

Abstrakty

EN

Pollution of the marine environment by ship garbage is an urgent problem to be solved at home and abroad. The ship kitchen garbage vacuum collection system is a new environmental protection scheme for garbage disposal. It has many advantages, such as using a pipeline instead of manual operation, creating high-level sanitary conditions, realising completely closed garbage collection and transportation, eliminating cross-pollution, saving space and so on. In this paper, the system is modelled, and the calculation of pipeline pressure loss, the vacuum degree of the vacuum tank and the energy consumption of the system are briefly introduced. In order to reduce the energy consumption, an algorithm for the emptying and discharging port is presented. In order to solve the problem of optimising relevant parameters, the vacuum transport mechanism of garbage is studied based on an optimisation model of the pipe network, and the experimental platform of a simulation device is set up. In engineering, this is of great significance to the design of cruise ship garbage collection and treatment systems and the development of supporting technology

• Wydawca: -
• Czasopismo: Polish Maritime Research
• Rocznik: 2020
• Tom: 27
• Numer: 1
• Opis fizyczny: p.152-161,fig.,ref.

Twórcy

autor

Du J.

• Jiangsu University of Science and Technology, No.2 Mengxi Road, Jingkou District, 212003 Zhenjiang, China

autor

Li R.

• Jiangsu University of Science and Technology, No.2 Mengxi Road, Jingkou District, 212003 Zhenjiang, China

autor

Wu X.

• Jiangsu University of Science and Technology, No.2 Mengxi Road, Jingkou District, 212003 Zhenjiang, China

autor

Zhao H.

• Jiangsu University of Science and Technology, No.2 Mengxi Road, Jingkou District, 212003 Zhenjiang, China

Bibliografia

• 1. Chen J., et al. (2015): Erosion prediction of liquid-particle two-phase flow in pipeline elbows via CFD-DEM coupling method. Powder Technology, 275, 182-187.
• 2. Du, J.,Bansal, P.,Huang, B. (2012): Simulation model of a greenhouse with a heat-pipe heating system. Applied Energy, 93(C), 268-276.
• 3. Du J., Cai Z.,Zhang Y. (2018): Simulation and experimental study of SCR injection system. Polish Maritime Research Special Issue 2018 S2(98) 2018 Vol. 25, 49-55.
• 4. Du J., Li R., Wu X., Zhang Y. (2018): Study on optimization simulation of SCR denitration system for marine diesel engine. Polish Maritime Research Special Issue 2018 S3(99) 2018 Vol. 25, 13-21.
• 5. Du, J., Li, R., Wang, H., Wu, X. (2019): Environmental Study on Supercritical CO2 Extraction of Nanocrystalline. Ekoloji, 107(28), 3169-3175.
• 6. Fernández C.,Manyà F.,Mateu C., et al. (2014): Modeling energy consumption in automated vacuum waste collection systems. Environmental Modelling & Software, 56, 63-73.
• 7. Fernández C., Manyà F., Mateu C., Sole-Mauri F. (2015): Approximate dynamic programming for automated vacuum waste collection systems. Environmental Modelling & Software, 67, 128-137.
• 8. Fisher C., Meech R. (2013): Bunkers: An analysis of the technical and environmental issues. Petrospot Limited, UK.
• 9. Huang S., et al. (2015): Transient numerical simulation for solid-liquid flow in a centrifugal pump by DEM-CFD coupling. Engineering Applications of Computational Fluid Mechanics, 9(1), 411-418.
• 10. Hong S., Shanshan G., Xiaohui Q, (2018): Thermodynamics analysis of a stratospheric airship with hovering capability. Applied Thermal Engineering, 146, 600-657.
• 11. Jajcevic D., et al. (2013): Large-scale CFD–DEM simulations of fluidized granular systems. Chemical Engineering Science, 98(29), 298-310.
• 12. Konstandopoulos A. G., Zarvalis D., Chasapidis L.,et al. (2017): Investigation of SCR Catalysts for Marine Diesel Applications. SAE Int. J. Engines, 10(4) 16530-1666.
• 13. Levy A. (2010): Modeling of heat transfer in pneumatic conveyer using a combined DEM-CFD numerical code. Drying Technology, 28(2), 155-164.
• 14. Mohseni M., Peters B. (2016): Effects of particle size distribution on drying characteristics in a drum by XDEM: A case study. Chemical Engineering Science, 152, 689-698.
• 15. Marigo M., Stitt E. H. (2015): Discrete Element Method (DEM) for Industrial Applications: Comments on Calibration and Validation for the Modelling of Cylindrical Pellets. Kona, 32, 236-252.
• 16. Patil A. V., et al. (2015): Comparison of CFD–DEM heat transfer simulations with infrared/visual measurements. Chemical Engineering Journal, 277, 388-401.
• 17. Pan D.,Gu C.,Zhang D.,et al. (2019): Investigation on the relationship between slurry droplet entrainment and fine particle emission in the limestone-gypsum WFGD system. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects (5):1-14.
• 18. Scherer V., et al. (2016): Coupled DEM–CFD simulation of drying wood chips in a rotary drum–Baffle design and model reduction. Fuel, 184, 896-904.
• 19. Wang J.,Chia A., Meng H.,et al. (2010): Control of Diesel Engine Urea Selective Catalytic Reduction Systems. Etd. ohiolink.edu, 2010.
• 20. Zhong W., et al. (2016): DEM/CFD-DEM modelling of nonspherical particulate systems: Theoretical developments and applications. Powder Technology, 302, 108-152.

Identyfikatory

DOI

10.2478/pomr-2020-0016