Determination of dyestuffs remaining in dyeing processes of vegetable-tanned leathers and their removal using shavings

• Autorzy: Zengin G. , Ozgunay H. , Ayan E. M. , Mutlu M. M.
• Języki publikacji: EN

Abstrakty

EN

This study investigates amounts of acid and metal complex dyes remaining in baths after the dyeing processes of vegetable tanned leathers and their removal using chromium and vegetable shavings as adsorbents. The results indicated that 97-867 mgL⁻¹ of acid dyes and 15-369 mgL⁻¹ of metal complex dyes remain at the end of dyeing processes of vegetable-tanned leathers. The adsorption behaviors of chromium and vegetable shavings were investigated toward four acid dyes and four 1:1 metal complex dyes having four different types of metal atoms (Cr, Fe, Cu, Co). Batch adsorption technique was used in adsorption experiments. The effects of time, pH, and adsorbent amount parameters on dye adsorption were investigated. Optimum pH values were pH 2.0 and pH 3.8 for vegetable shavings and chromium shavings, respectively. Adsorption capacities of chromium and vegetable shavings were found to be between 123.5-454.5 mg·g⁻¹ and 68.0-154.0 mg·g⁻¹ depending on the type of dye. From the results it was clearly seen that both chromium and vegetable shavings could be used as adsorbents for acid and metal complex dyes, while chromium shavings performed better. The experimental data of adsorption isotherms of all dyes fit well to the Langmuir model.

• Wydawca: -
• Czasopismo: Polish Journal of Environmental Studies
• Rocznik: 2012
• Tom: 21
• Numer: 2
• Opis fizyczny: p.499-508,fig.,ref.

Twórcy

autor

Zengin G.

• Faculty of Engineering, Department of Leather Engineering, Ege University

autor

Ozgunay H.

• Faculty of Engineering, Department of Leather Engineering, Ege University

autor

Ayan E. M.

• Chemistry Department, Faculty of Science, Ege University 35100 Bornova-Izmir, Turkey

autor

Mutlu M. M.

• Faculty of Engineering, Department of Leather Engineering, Ege University

Bibliografia

• 1. POON C.S., HUANG Q.P., FUNG C. Degradation of Cuprophenyl Yellow RL by UV/H2O2/Ultrasonication (US) process in aqueous solution, Chemosphere, 38, 1005, 1999.
• 2. BROWN D. Effects of colorants in the aquatic environment, Ecotox. Envıron. Safe, 13, (2), 139, 1987.
• 3. BUITRON G., GONZALES A. Characterization of the microorganisms from an acclimated activated sludge degrading phenolic compounds, Water. Sci. Technol., 34, (5-6), 289, 1996.
• 4. MOHN W. W., MARTIN V. J. J. E., YU Z. T. Biochemistry and ecology of resin acid biodegradation in pulp and paper mill effluent treatment systems, Water. Sci. Technol., 40, (11-12), 273, 1999.
• 5. TREMLETT R.J., LEAFE M. K. Leather Technologists Pocket Book, Society of Leather Technologists and Chemists, 101, 1999.
• 6. OZGUNAY H., MUTLU M.M., KILICARISLAN C., YUMURTAS A. Dyeing properties of simple acid and metalcomplex dyestuffs on the leathers tanned with various tanning materials, Journal of Textile and Apparel, 4, 292, 2009.
• 7. MALIK P.K. Use of activated carbon prepared from sawdust and rice husk for adsorption of acid dyes: a case study of acid yellow 36, Dyes Pigments, 56, 239, 2003.
• 8. CHIOU M.S., LI H.Y. Adsorption behavior of reactive dye in aqueous solution on chemical cross-linked chitosan beads, Chemosphere, 50, (8), 1095, 2003.
• 9. SHUKLA A., ZHANG Y.H., DUBEY P., MARGRAVE J.L., SHUKLA S.S. J. The role of sawdust in the removal of unwanted materials from water, J. Hazard. Mater., 95, (1-2), 137, 2002.
• 10. GARG V.K., GUPTA R., YADAV A.B., KUMAR R. Dye removal from solution by adsorption on treated sawdust, Bioresource Technol., 89, 121, 2003.
• 11. OZACAR M., SENGIL I.A. Adsorption of metal complex dyes from aqueous solutions by pine sawdust, Bioresource Technol., 96, (7), 791, 2005.
• 12. RAMAKRISHNA K.R., VIRARAGHAVAN T. Use of slag for dye removal, Waste Manage., 17, (8), 483, 1997.
• 13. TAHIRI S., MESSAOUDI A., ALBIZANE A., AZZI M., BOUHRIA M., YOUNSSI S.A., BENNAZHA J., MABROUR J. Removal of dyes from aqueous solutions by adsorption on chrome-tanned solid wastes generated in the leather industry, Water Quality Journal of Canada, 38, (2), 393, 2003.
• 14. SREERAM K.J., SARAVANABHAVAN S., RAO J.R., NAIR B.U. Use of chromium-collagen wastes for the removal of tannins from wastewaters, Ind. Eng. Chem. Res., 43, (17), 5310, 2004.
• 15. GAMMOUN A., TAHIRI S., ALBIZANE A., BOUHRIA M., AZZI M., GUARDIA de la M. The Use of Chrome Shavings for the Decontamination of Water Polluted with Dyes and Oils, Water Quality Journal of Canada, 42, (1), 46, 2007.
• 16. BROWN E.M., TAYLOR M.M., MARNER W.M. Production and potential uses of co-products from solid tannery waste, J. Am. Leather Chem. As, 91, (10), 270, 1996.
• 17. CABEZA L.F., TAYLOR M.M., DIMAIO G.L., BROWN E.M., MARMER W.N., CARRIO R., CELMA P.J., COT J. Processing of leather waste: pilot scale studies on chrome shavings. Isolation of potentially valuable protein products and chromium, Waste Manage., 18, 211, 1998.
• 18. ZHANG M., SHI B. Adsorption of dyes from aqueous solution by chromium-containing leather waste, J. Soc. Leath. Tech. Ch., 88, (6), 236, 2004.
• 19. TAHIRI S., AZZI M., ALBIZANE A., MESSAOUDI A., BOUHRIA M., SIBARI A. Processing of chrome tanned solid waste generated in the leather industry: recovery of proteins and synthesis of a pigment for paint. Journal of the American Chemists Association, 96, 1, 2001.
• 20. TAHIRI S., AZZI M., ALBIZANE A., MESSAOUDI A., BOUHRIA M., ALAMI YOUNSSI S., MOURID A., AMGHAR J. Study of quality of a pigment prepared by complexation of chromates recovered from treated chrome shavings and tanned splits, Journal of the American Chemists Association, 96, 426, 2001.
• 21. TAYLOR M.M., CABEZA L.F., DIMAIO G.L., BROWN E.M., MARMER W.N., CARRIO R., CELMA P.J., COT J. Processing of leather waste: pilot scale studies on chrome shavings. Part I. Isolation and characterization of protein products and separation of chrome cake, Journal of the American Chemists Association, 93, 61, 1998.
• 22. CABEZA L.F., TAYLOR M.M., DIMAIO G.L., BROWN E.M., MARMER W.N., CARRIO R., CELMA P.J., COT J. Processing of leather waste: pilot scale studies on chrome shavings. Part II. Purification of chrome cake and tanning trials, Journal of the American Chemists Association, 93, 83, 1998.
• 23. PANSWAD T., CHAVALPARIT O., SUCHARITTHAM Y., CHAROENWISEDSIN S. A benchscale study on chromium recovery from tanning wastewater, Water. Sci. Technol., 31, 73, 1995.
• 24. SLTC Official Methods of Analysis, 1996.
• 25. American Society for Testing and Materials (ASTM), 2005.
• 26. SAKA E.E., GULER C. The effects of electrolyte concentration, ion species and pH on the zeta potential and electrokinetic charge density of montmorillonite, Clay Miner., 41, (4), 853, 2006.
• 27. WANG Y.L., LIAO X.P., GU Y.C., ZHAO S.L., SHI B. Alternative utilization of skin wastes: preparation of a Fe(III)-loaded adsorbent for anionic dyes in aqueous solution, J. Soc. Leath. Tech. Ch., 90, (5), 205, 2006.
• 28. OLIVEIRA L.C.A., GONCALVES M., OLIVEIRA D.Q.L., GUERREIRO M.C., GUILHERME L.R.G., DALLAGO R.M. Solid waste from leather industry as adsorbent of organic dyes in aqueous-medium, J. Hazard. Mater., 141, 344, 2007.
• 29. ARAVINDHAN R., FATHIMA N.N., RAO R., NAIR U. Utilization of calcium alginate beads as adsorbent for removal of dyes from tannery wastewaters, Journal of the American Chemists Association, 101, 223, 2006.
• 30. COT J., ARAMON C. Waste processing in the tannery: production of gelatin, reconstituted collagen and glue from chrome-tanned leather splits and trimmings subjected to a modified detanning process, J. Soc. Leath. Tech. Ch., 70, (3), 69, 1986.
• 31. HEIDEMANN E. The principle of binding mechanism, binding forces of chemical compounds on collagen, Fundamentals of Leather Manufacture, Printed by Roetherdruck, Darmstadt, ISBN 3-7929-0206-0, pp. 259-261, 1993.
• 32. KANAGARAJ J., VELAPPAN K. C., CHANDRA BABU N. K., SADULLA S. Solid wastes generation in the leather industry and its utilization for cleaner environment – A review, Journal of Scientific and Industrial Research (JSIR), 65, (07), 541, 2006.
• 33. BITLISLI B. O., KARACAKI E. Utilisation of leather industry solid wastes in the production of porous clay brick, J. Soc. Leath. Tech. Ch., 90, (1), 19, 2006