Evaluating noise sources in a working environment when disintegrating rocks by rotary drilling

• Autorzy: Flegner P. , Kacur J. , Durdan M. , Laciak M.
• Języki publikacji: EN

Abstrakty

EN

The mechanical disintegration of rocks plays an irreplaceable role in the exploration, preparation, and mining of minerals resources in geological and engineering surveys. When disintegrating by rotary drilling, the disintegration tool interacts with the rock and converts the mechanical energy to thermal energy caused by the friction of the disintegration tool on the rock. Consequently, undesirable accompanying sounds occur in the process of disintegration of the rock by drilling. These include vibrations that show up in the working environment as noise. The noise generated during rotary drilling can be scanned as an acoustic signal. From above, it is possible to say that noise and vibration have a direct negative impact on the machinery personnel, on the working environment and on the environment. At present, research in the field of the disintegration of rocks by rotary drilling is directed at analyzing the factors affecting the disintegration of rocks and the working environment. This article analyzes experimental measurements carried out on a horizontal drilling tool. Measured vibroacoustic signals in different operating modes will be processed in the time, frequency, and time-frequency domains.

• Wydawca: -
• Czasopismo: Polish Journal of Environmental Studies
• Rocznik: 2019
• Tom: 28
• Numer: 5
• Opis fizyczny: p.3711-3720,fig.,ref.

Twórcy

autor

Flegner P.

• Institute of Control and Informatization of Production Processes, Faculty BERG, Technical University of Kosice, Kosice, Slovak Republic

autor

Kacur J.

• Institute of Control and Informatization of Production Processes, Faculty BERG, Technical University of Kosice, Kosice, Slovak Republic

autor

Durdan M.

• Institute of Control and Informatization of Production Processes, Faculty BERG, Technical University of Kosice, Kosice, Slovak Republic

autor

Laciak M.

• Institute of Control and Informatization of Production Processes, Faculty BERG, Technical University of Kosice, Kosice, Slovak Republic

Bibliografia

• 1. FLEGNER P., KAČUR J., DURDÁN M., LACIAK M., STEHLÍKOVÁ B., PÁSTOR M. Significant damages of core diamond bits in the process of rocks drilling. Engineering Failure Analysis, 59, 354, 2016.
• 2. FLEGNER P., KAČUR J., DURDÁN M., LACIAK M. Application of adaptive filters in rock separation by rotary drilling process identification. Acta Montanistica Slovaca, 20 (1), 2015.
• 3. FLEGNER P., KAČUR J., DURDÁN, M., LEŠŠO I., LACIAK M. Measurement and processing of vibro-acoustic signal from the process of rock disintegration by rotary drilling. Measurement: Journal of the International Measurement Confederation, 56, 178, 2014.
• 4. AKER E., KÜHN D., VAVRYČUK V., SOLDAL M., OYE V. Experimental investigation of acoustic emissions and their moment tensors in rock during failure. International Journal of Rock Mechanics and Mining Sciences, 70, 286, 2014.
• 5. HOOD M., ALEHOSSEIN H. A development in rock cutting technology. International Journal of Rock Mechanics and Mining Sciences, 37 (1-2), 297, 2000.
• 6. KRECHMER K. Relative measurement theory, The unification of experimental and theoretical measurements. Measurement, 116, 77, 2018.
• 7. QI G., ZHENGYING W., HAO M. An experimental research on the rock cutting process of the gage cutters for rock tunnel boring machine (TBM). Tunnelling and Underground Space Technology, 52, 182, 2016.
• 8. GENG Q., WEI Z., REN J. New rock material definition strategy for FEM simulation of the rock cutting process by TBM disc cutters. Tunnelling and Underground Space Technology, 65, 179, 2017.
• 9. KAHRAMAN S. Rotary and percussive drilling prediction using regression analysis. International Journal of Rock Mechanics and Mining Sciences, 36 (7), 981, 1999.
• 10. PANDA A., JURKO J., DŽUPON M., PANDOVÁ I. Optimalization of heat treatment bearings rings with goal to eliminate deformation of material. Chemické Listy, 105 (16), 459, 2011.
• 11. TREBUŇA F., ŠIMČÁK F., BOCKO J., TREBUŇA P. Failure analysis of mechanical elements in steelworks equipment by methods of experimental mechanics. Engineering Failure Analysis, 17 (4), 787, 2010
• 12. LI Z., ITAKURA K.-I., MA Y. Survey of measurement-while-drilling technology for small-diameter drilling machines. Electronic Journal of Geotechnical Engineering, 19 (2), 10267, 2014.
• 13. SALIMI A., ESMAEILI M. Utilising of linear and non-linear prediction tools for evaluation of penetration rate of Tunnel Boring Machine in hard rock condition. International Journal of Mining and Mineral Engineering, 4 (3), 249, 2013.
• 14. TIRYAKI B., DIKMEN A. C. Effects of Rock Properties on Specific Cutting Energy in Linear Cutting of Sandstones by Picks. Rock Mechanics and Rock Engineering, 39 (2), 89, 2005.
• 15. ZHAO X.X., GONG Y.D. Research on the Load on Cutter Head of Hard Rock Tunnel Boring Machine. Applied Mechanics and Materials, 684, 303, 2014.
• 16. CIRIMELLO P., OTEGUI J.L., SANCHEZ J.M., CARFI G. Oil well drill bit failure during pull out: Redesign to reduce its consequences. Engineering Failure Analysis, 83, 75, 2018.
• 17. SCHRÖTTER M., TREBUŇA F., HAGARA M., KALINA M. Methodology for Experimental Analysis of Pipeline System Vibration. Procedia Engineering, 48, 613, 2012.
• 18. WITTENBERGER G., CEHLÁR M., JURKASOVÁ Z. Deep hole drilling modern disintegration technologies in process of HDR technology. Acta Montanistica Slovaca, 17 (4), 241, 2012.
• 19. CHENG H.W., TAO J.Y., CHEN X., JIANG Y. Amplitude probability density function for skewed non-Gaussian random vibration signals based on gaussian-mixture model. Zhendong yu Chongji/Journal of Vibration and Shock, 33 (12), 121, 2014.
• 20. JURKO J., DŽUPON M., PANDA A., GAJDOŠ M., PANDOVÁ I. Deformation of material under the machined surface in the manufacture of drilling holes in austenitic stainless steel. Chemické listy, 105 (16), 600, 2011.
• 21. SHREEDHARAN S., HEGDE C., SHARMA S., VARDHAN H. Acoustic fingerprinting for rock identification during drilling. International Journal of Mining and Mineral Engineering, 5 (2), 89, 2014.
• 22. KAHRAMAN S., BILGIN N., FERIDUNOGLU C. Dominant rock properties affecting the penetration rate of percussive drills. International Journal of Rock Mechanics and Mining Sciences, 40 (5), 711, 2003.
• 23. KARAKUS M., PEREZ S. Acoustic emission analysis for rock-bit interactions in impregnated diamond core drilling. International Journal of Rock Mechanics and Mining Sciences, 68, 36, 2014.
• 24. KLAIC M., MURAT Z., STAROVESKI T., BREZAK D. Tool wear monitoring in rock drilling applications using vibration signals. Wear, 408-409, 222, 2018.
• 25. KRECHMER K. Relational measurements and uncertainty. Measurement, 93, 36, 2016.
• 26. KUMAR B.R., VARDHAN H., GOVINDARAJ M., VIJAY G.S. Regression analysis and ANN models to predict rock properties from sound levels produced during drilling. International Journal of Rock Mechanics and Mining Sciences, 58, 61, 2013.
• 27. AKÇAY H. Spectral estimation in frequency-domain by subspace techniques. Signal Processing, 101, 204, 2014.
• 28. PARDO-IGÚZQUIZA E., RODRIGUEZ-TOVAR F.J. Spectral and cross-spectral analysis of uneven time series with the smoothed Lomb-Scargle periodogram and Monte Carlo evaluation of statistical significance. Computers & Geosciences, 49, 207, 2012.
• 29. LEE N., PARK Y., LEE G.W. Frequency-domain active noise control for magnetic resonance imaging acoustic noise. Applied Acoustics, 118 (Supplement C), 30, 2017.
• 30. LIU G., KONG D., SUN J. Feasibility analysis on application of casing head vibration signal in wellbore anti-collision monitoring. China Offshore and Gas, 24 (3), 54, 2012.
• 31. LU Z., WANG Z., ZHOU Y., LU X. Nonlinear dissipative devices in structural vibration control: A review. Journal of Sound and Vibration, 423, 18, 2018.
• 32. FERNÁNDEZ-ROS M., PARRA J.A.G., SALVADOR R.M.G., CASTELLANO N.N. Optimization of the periodogram average for the estimation of the power spectral density (PSD) of weak signals in the ELF band. Measurement, 78, 207, 2016.
• 33. ROSTAMI J., KAHRAMAN S., NAEIMIPOUR A., COLLINS C. Rock characterization while drilling and application of roof bolter drilling data for evaluation of ground conditions. Journal of Rock Mechanics and Geotechnical Engineering, 7 (3), 273, 2015.
• 34. ROSTAMI J., KAHRAMAN S., NAEIMIPOUR A., COLLINS C. Monitoring of Acoustic Emission During the Disintegration of Rock. Procedia Engineering, 149, 481, 2016.
• 35. MASOOD VARDHAN H., ARUNA M., KUMAR B.R. A critical review on estimation of rock properties using sound levels produced during rotary drilling. International Journal of Earth Sciences and Engineering, 5 (6), 1809, 2012.
• 36. LIU G., ZHANG J., LIU C., LIU H., YU C. A borehole collision recognition method based on the time statistical characteristics. Journal of China University of Petroleum (Edition of Natural Science), 40 (2), 70, 2016.
• 37. TREFOVÁ L., LAZAROVÁ E., KRÚPA V. Application of fuzzy methods in tunnelling. Acta Montanistica Slovaca, 16 (3), 197, 2011.
• 38. CHLEBOVÁ, Z. Simulation analysis of vibratory device controlled vibration. Acta Mechanica Slovakia, 12 (3), 323, 2008.
• 39. HUO B.Y., YI W.J. Identification and correction for a digital signal with close frequencies. Zhendong yu Chongji/Journal of Vibration and Shock, 32 (2), 171, 2013.
• 40. LIU G., LIU C., XIA X.Y., XU J.X., PEI C.L. Identification of vibration singals of drill bit based on Hilbert-Huang transform method. Zhendong yu Chongji/Journal of Vibration and Shock, 34 (12), 212, 2015.

Identyfikatory

DOI

10.15244/pjoes/94848