Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 7

Liczba wyników na stronie
Pierwsza strona wyników Pięć stron wyników wstecz Poprzednia strona wyników Strona / 1 Następna strona wyników Pięć stron wyników wprzód Ostatnia strona wyników

Wyniki wyszukiwania

help Sortuj według:

help Ogranicz wyniki do:
Pierwsza strona wyników Pięć stron wyników wstecz Poprzednia strona wyników Strona / 1 Następna strona wyników Pięć stron wyników wprzód Ostatnia strona wyników
The paper is referring to the geotechnical centrifuge modelling that is used to prove the gabion facing wall stability. The gabion reinforcement wall is 15.3 meters tall and 17 meters length. The centrifuge model was speed up to 50 g and 75 g, and hadn't failure. The test results show that the largest settlements under 75 g speed was about 2.25 meters vertically and mainly in the gabion wall and just behind the gabion section. The largest settlements under 50 g speed was about 1.07 meter vertically and 1.8 meters horizontally. The value of the settlement increases with the shortness of the reinforcement. The value of the settlement decreases with the reduction of the gabion spacing in the wall facing. Reinforced gabion retaining wall can work safely. Nevertheless, mechanical and deformation behaviors need to be studied for wide applying in a practical engineering.
W artykule podjęta została tematyka słabonośnych gruntów organicznych, gytii, zlokalizowanych głównie w dolinach jezior i rzek oraz stanowiących podłoże budowlane w aglomeracjach miejskich. Grunty te ze względu na dużą ściśliwość, małą wytrzymałość na ścinanie oraz trudną do oceny przepuszczalność w porównaniu z gruntami mineralnymi stwarzają problemy podczas projektowania posadowień konstrukcji inżynierskich. Zachowanie się gytii pod obciążeniem jest trudne do przewidzenia z uwagi na dużą nieliniowość charakterystyk odkształceniowych i zmienność parametrów wytrzymałościowych. Dlatego niezwykle istotna jest właściwa ocena parametrów odkształceniowych gruntów organicznych oraz ich weryfikacja z wynikami badań in situ. W pracy przedstawiono wyniki uzyskane z badań laboratoryjnych próbek typu A gytii oraz wyniki uzyskane z sondowań dylatometrem Marchettiego. Moduły ściśliwości uzyskane z badań laboratoryjnych zostały zweryfikowane wynikami badań terenowych. Ocena parametrów odkształceniowych gytii pozwoli na prognozę odkształceń i zapewnienie bezpiecznej, bezawaryjnej pracy projektowanej konstrukcji inżynierskiej.
The paper is referring to vertical and horizontal laboratory permeability measurements in soft organic soils. The estimation of anisotropic permeability in soft organic soils, as peats, requires to use a special apparatus and the knowledge of proper analysis of the test results. During loading the void ratio decreases substantially that causes the changeability of the permeability. The change of permeability during the compression is very important because of the infl uence of the consolidation coefficient. Initial strain in soft organic soils appears very quickly, just after loading, and brings immediately the decrease of permeability. In most of the estimations, it is assumed that during the consolidation process the water flows just in the vertical direction. In soft organic soils, like peats, the consolidation theory should consider the changes of mechanical and physical properties in consolidation period, in both directions. The direct measurement of vertical and horizontal permeability of organic soil and the non-Darcian flow theory may be of considerable importance in estimating pore water pressure dissipation, and settlement rates in the consolidation model. In the paper, the method of investigation and the test results of the vertical and horizontal permeability are presented. The Modifi ed Rowe Cell Set for obtaining consolidation and fl ow characteristics in different directions is used.
Derivation of consolidation partial differential equation with non-linear flow characteristics is proposed. The non-linear flow characteristics are obtained from flow-pump test on organic soil and described with empirical relationship. Several reasons were crucial to perform tests on organic soil. Firstly organic soils are very compressible, so that results in high permeability changes. Even with small stresses organic soil deforms a lot. Secondly road embankments, flood control levees, dykes and dams are very often located on organic soil, so it is important to model deformations under these constructions. Thus to model consolidation process in soft organic soil one should consider as follows: physical and mechanical properties, non-linear stress-strain relationship, non-linear flow characteristics, and creep strains. This paper is focused mainly on non-linear flow characteristics that change with porosity and hydraulic gradient variations.
Pierwsza strona wyników Pięć stron wyników wstecz Poprzednia strona wyników Strona / 1 Następna strona wyników Pięć stron wyników wprzód Ostatnia strona wyników
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.