Effect of microstructure on mechanical properties and corrosion resistance of 2205 duplex stainless steel

• Autorzy: Labanowski J. , Swierczynska A. , Topolska S.
• Języki publikacji: EN

Abstrakty

EN

This paper presents results of the research on impact of microstructure of austenitic-ferritic steel of duplex type on its mechanical properties and susceptibility to stress corrosion cracking. As showed, improper processing technologies more and more often used in shipbuilding industry for plates and other half-finished products made of duplex steel may cause significant lowering their properties, which frequently makes their replacing necessary. Results of the tests on stress corrosion under tension with low strain rate (SSRT) conducted in an inert and corrosion (boiling magnesium chloride) environment , are presented. It was proved that even minor structural transformations taking place in 500ºC ageing temperature lower corrosion resistance of the steel. Structural transformations occurring in 700ºC temperature to a smaller extent influence susceptibility to stress corrosion of the steel, however they cause drastic drop in its plasticity

• Wydawca: -
• Czasopismo: Polish Maritime Research
• Rocznik: 2014
• Tom: 21
• Numer: 4
• Opis fizyczny: p.108-112,fig.,ref.

Twórcy

autor

Labanowski J.

• Faculty of Mechanical Engineering, Gdansk University of Technology, 11/12 Narutowicza St., 80-233 Gdansk, Poland

autor

Swierczynska A.

• Faculty of Mechanical Engineering, Gdansk University of Technology, 11/12 Narutowicza St., 80-233 Gdansk, Poland

autor

Topolska S.

• Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology in Gliwice, 2A Akademicka St., 44-100 Gliwice, Poland

Bibliografia

• 1. Astrom H., Nicholson F., Stridh L.E., Welding of stainless steels in the building of chemical tankers. Welding in the World, Vol. 36, (1995), pp.181-189.
• 2. Charles J., The duplex stainless steels: materials to meet your needs. Proc. Conf. „Duplex Stainless Steels ‚91”, Les Ulis, France, Les Editions de Physique (1991), pp. 3-45.
• 3. Wang X.G., Dumortier D., Riquier Y., Structural evolution of zeron 100 duplex stainless steel between 550 and 1100ºC. Proc. Conf. “Duplex Stainless Steels ‘91”, Les Ulis, France, Les Editions de Physique, (1991), pp.127-134.
• 4. Lo K.H., Shek C.H., Lai J.K.L., Recent developments in stainless steels. Materials Science and Engineering R, 65 (2009), pp. 39-104.
• 5. Łabanowski J., Mechanical properties and weldability of duplex stainless steels. Przegląd Spawalnictwa, vol. 59, 10 (2007), pp. 35-40,
• 6. Ćwiek J., Prevention methods against hydrogen degradation of steel. Achiev. Mater. Manuf. Eng., vol. 43, 1 (2010), pp. 214-221.
• 7. Topolska S., Łabanowski J., Effect of microstructure on impact toughness of duplex and super-duplex stainless steels. Journal of Achievements in Materials and Manufacturing Engineering. - vol. 36, 2 (2009), pp. 142-149
• 8. PN-EN ISO 7539-7:2006. Corrosion of metals and alloys. Stress corrosion testing. Slow strain rate testing.
• 9. Wilms M.E.: Gadgil V., Krougman J., Jesseling F., The effect of σ phase precipitation at 800°C on the corrosion resistance in sea-water of a high alloyed duplex stainless steel. Corrosion Science. Vol. 36, 5 (1994), pp. 871-881.
• 10.Adhe K., Kain K., Madangopal K., Gadiyar H.: Influence of sigma-phase formation on the localized corrosion of a duplex stainless steel. J. of Materials Eng. and Performance. Vol. 5, 4 (1996), pp. 500-506.

Identyfikatory

DOI

10.2478/pomr-2014-0047