Influence of ship motion on waterway. Backward current velocity

• Autorzy: Kulczyk J. , Werszko R.
• Języki publikacji: EN

Abstrakty

EN

In this work was presented an influence of bow form of inland waterways ship and waterway limitations on values of backward current velocity. The analysis was performed on the basis of results of calculations with the use of numerical modeling the flow around ship hull. The applied HPSDK computation system (a computer software developed by these authors) is based on using surface distribution of vorticity to analyze the velocity field and pressure distribution around ship hull. It was proved that the generated backward current velocity exceeded its permissible non-scouring values

• Wydawca: -
• Czasopismo: Polish Maritime Research
• Rocznik: 2006
• Numer: Special Issue S2
• Opis fizyczny: p.23-28,fig.,ref.

Twórcy

autor

Kulczyk J.

• Wroclaw University of Technology, Lukasiewicza 7/9, 50-371 Wroclaw, Poland

autor

Werszko R.

• Wroclaw University of Technology, Lukasiewicza 7/9, 50-371 Wroclaw, Poland

Bibliografia

• 1. Arkuszewski A., Przyłęcki W., Symonowicz A., Żylicz A.: Use of waterways (in Polish). Arkady. Warszawa, 1971
• 2. Górski W.; Kulczyk J.; Tabaczek T.: The effect of limited depth and with of waterway on performance of ducted propellers, Polish Maritime Research, No 4(46), vol.12, 2005.
• 3. INBAT Working Documentation (in Polish), Wrocław University of Technology. Wrocław, 2004
• 4. ITTC : Proceedings of the 23rd International Towing Tank Conference, Vol. I, 2002.
• 5. Kulczyk J.: Numerical modeling the hydrodynamic interactions within propulsion system of inland navigation ship (in Polish). Research reports of the Institute of Construction and Operation of Machines, Wrocław University of Technology, No. 66, Series : Monographs No.17. Publishing House of Wrocław University of Technology (Wydawnictwo Politechniki Wrocławskiej). Wrocław, 1992
• 6. Kulczyk J.: The influence of going ship on waterway bottom, 6-th Conference on Problems of Hydro-engineering, Institute of Geotechnics and Hydrotechnics, Wrocław University of Technology, Series : Conferences No. 38. Wrocław, 1996
• 7. Kulczyk J., Tabaczek T.: Energy-saving devices in ship building and operating. Nozzles and half- nozzles for equalizing the velocity field. Principles of choice (in Polish). Institute of Construction and Operation of Machines, Wrocław University of Technology,Report No. S-026/93, Series : Reports. Wrocław, 1993
• 8. Kulczyk J.; Popczyk Z.; Tabaczek T.; Zając P.: Numerical modeling the hydrodynamic interactions within steering gear of inland navigation ship (in Polish). Institute of Construction and Operation of Machines, Wrocław University of Technology, Report No. S-020/97, Series : Reports. Wrocław, 1997
• 9. Kulczyk J.; Prokopowicz J.; Tabaczek T.; Werszko R.; Zawiślak M.; Zieliński A.: Numerical modeling the viscous flow around hull of inland navigation ship on limited waterway (in Polish). Institute of Construction and Operation of Machines, Wrocław University of Technology, Report No. S-043/03, Series : Preprints. Wrocław, 2003
• 10. Kulczyk J.; Tabaczek T.; Werszko R.: Method of Describing Hull Shape of Generating Gird of HPSDK Software, 14th International Conference on Hydrodynamics in Ship Design, Szczecin, September 2001.
• 11. Kulczyk J.; Winter J.: Inland waterways transport (in Polish). Publishing House of Wrocław University of Technology (Oficyna Wydawnicza Politechniki Wrocławskiej). Wrocław, 2003
• 12. Skatula L.: Building-over rivers and mountain streams (in Polish). PWRL. Warszawa, 1964
• 13. Zając P.: A method for determining values of sag and trim of inland navigation ship (in Polish). Doctoral thesis, Institute of Construction and Operation of Machines, Wrocław University of Technology, Report No.11/99, Series : Preprints. Wrocław, 1999