Mathematical modelling of elastic deflection of a tubular cross-section

• Autorzy: Zastempowski M. , Bochat A.
• Języki publikacji: EN

Abstrakty

EN

Cutting a tubular element into thin rings is an operation often used in engineering processes. Total work of the cutting consists of that necessary for initial deflection of cut material and the cutting work itself. This paper presents mathematical models which describe deflection of cross-section of a single tubular element as well as a single layer of tubes under action of external forces ( acting and reacting ones). The deflection concerns end part of tube hence the cutting object model has been reduced to a thin ring. Results of calculation by using the developed models are presented for selected materials of tubular elements, which are commonly used for structures of the kind; moreover , they are prepared in a form of dimensionless diagrams, that makes it possible to use them for an arbitrary material

• Wydawca: -
• Czasopismo: Polish Maritime Research
• Rocznik: 2015
• Tom: 22
• Numer: 2
• Opis fizyczny: p.93-100,fig.,ref.

Twórcy

autor

Zastempowski M.

• University of Technology and Life Science in Bydgoszcz, 20 Ks.Kordeckiego St., 85-225 Bydgoszcz, Poland

autor

Bochat A.

• University of Technology and Life Science in Bydgoszcz, 20 Ks.Kordeckiego St., 85-225 Bydgoszcz, Poland

Bibliografia

• 1. Bochat A., Grzonkowski R., Zastempowski M.: Analysis of plant stalk cutting and a novel cutting drum unit ( in Polish ). Inżynieria i Aparatura Chemiczna, No.1-2/2005.
• 2. Bohdal l.,  Kukiełka  L.: Application of variational and FEM methods to the modelling and numerical analysis of guillotining process for geometrical and physical nonlinearity. Mechanika vol. 20, No. 2, 2014. pp. 197-204.
• 3. Chattopahyay P.S., Pandey K.P.: Mechanical properties of sorghum in relation to quasi- static deformation. Journal of Agricultural Engineering Research. Vol.73, 1999.
• 4. Jakubowicz A, Orłoś Z.: Strength of materials ( in Polish ). WNT Publishers, Warsaw, 1999.
• 5. Malag L,  Kukiełka L.: The sensitivity analysis of influence of chosen material parameters on the properties of surface layer product after burnishing. Steel Research International. Volume SPL. ISSUE, 2012, pp. 1335-1338.
• 6. Malag L.,Kukielka L., Kukielka K., Kulakowska A., Bohdal L., Patyk R.: Problems determining of the mechanical properties of metallic materials from the tensile test in the aspect of numerical calculations of the technological processes. Applied Mechanics and Materials. Vol. 474, 2014, pp. 454-459
• 7. Niezgodziński M.E.,  Niezgodziński T.: Strength of materials ( in Polish ). PWN Publishers, Warsaw, 1984.
• 8. O’Doherty M.J.,  Huber J.A.,  Dyson J.,  Marshall C.J.: A  study of the physical and mechanical properties of wheat straw. Journal of Agricultural Engineering Research, Vol.62, 1995.
• 9. Szala  G. Comments on linear summation hypothesis of fatigue failures. Polish Maritime Research. Nr 3 (83) Vol.21, 2014. pp. 77-85.

Identyfikatory

DOI

10.1515/pomr-2015-0022