Identification of influence of part tolerances of 3PWR-SE pump on its total efficiency taking into consideration multi-valued logic trees

• Autorzy: Deptula A. , Osinski P. , Partyka M.
• Języki publikacji: EN

Abstrakty

EN

This paper presents the way of identifying the influence of the tolerance of model pumps (TYPE 3PWR-SE) construction on the total efficiency. The identification of sensitive control dimensions (Value / Tolerance) of examined pumps has been made by means of the multi-valued logic and inductive decision trees. In order to confirm the obtained results, multiple-valued logic trees have been used in the paper according to algorithms for the minimization of individual logic functions. What is more, a specific monotonicity of values of the most key parameters has been determined for the investigated set of pumps having individual specification numbers

• Wydawca: -
• Czasopismo: Polish Maritime Research
• Rocznik: 2017
• Tom: 24
• Numer: 1
• Opis fizyczny: p.47-59,fig.,ref.

Twórcy

autor

Deptula A.

• Opole University of Technology, 75 Ozimska Street, 45-233 Opole, Poland
• Wroclaw University of Technology, 7/9 Ign.Lukasiewicza Street, 50-371 Wroclaw, Poland

autor

Osinski P.

• Wroclaw University of Technology, 7/9 Ign.Lukasiewicza Street, 50-371 Wroclaw, Poland

autor

Partyka M.

• Opole University of Technology, 75 Ozimska Street, 45-233 Opole, Poland

Bibliografia

• 1. Abel F.: Johannes Kepler and his importance to modern science, Inter Nations Bonn – Bad Godesberg, 1971
• 2. Berghofer S., Reiter. M.: Formalizing the logic-automaton connection, In: Proc. of the 22nd International Conference on Theorem Proving in Higher Order Logics, LNCS No 5674, 147–163, 2009
• 3. Bueno M.J. M., Hernando M. D., Aguera A., FernandezAlba A.: Application of passive sampling devices for screening of micro-pollutants in marine aquaculture using LC–MS/MS, Talanta, Vol. 77, 4, 15, 2009, pp. 1518–1527.
• 4. Chang Q., Zhou H, Xie Z., Shen S.: Anchoring mechanism and application of hydraulic expansion bolts used in soft rock roadway floor heave control, International Journal of Mining Science and Technology, Vol. 23, 3, 2013, pp. 323–328
• 5. Deptuła A.: Application of game graphs to describe the inverse problem in the designing of mechatronic vibrating systems. GRAPH-BASED MODELLING IN ENGINEERING, Springer, 2015 [accepted for print]
• 6. Deptuła A.: Application of multi-valued weighting logical functions in the analysis of a degree of importance of construction parameters on the example of hydraulic valves, International Journal of Applied Mechanics and Engineering, 19(3), 539-548, 2014
• 7. Deptuła A.: Game- tree structures with the complex complexity level as a tool in knowledge engineering. Systems in Management, Vol 2. Z. 2, ISSN 2084-5537, 2014
• 8. Deptuła A.: Integrated decision-making system in the study of acoustic an example of the gear pump Industrial transport and working machines (in Polish), 4(30), str. 65-71, ISSN 1899-5489, 2015
• 9. Deptuła A., Partyka M. A.: Decision optimization of machine sets with taking into consideration logical tree minimization of design guidlines, International Journal of Applied Mechanics and Engineering, Vol.19, No.3, University Press Zielona Góra, pp. 549-561 ISSN 142516554, 2014
• 10. Deptuła A., Partyka M.A.: Graphic matrix formalization of logical decision trees in the optimization of machine systems, GRAPH-BASED MODELLING IN ENGINEERING, Springer, 2015 [accepted for print]
• 11. Deptuła A., Partyka M. A.: Separate logical analysis of design guidelines in the machine systems modelling. International Journal of Applied Mechanics and Engineering, Vol.17, No.3, pp. 779-790, ISSN 1425-1655, 2012
• 12. Dymarski P, Dymarski C.: A numerical model to simulate the motion of a lifesaving module during its launching from the ship’s stern ramp, Polish Maritime Research, Vol. 21, 2, pp. 34-40, ISSN 2083-7429, 2014
• 13. Dymarski C.: Żuraw pokładowy z kompensacją nurzania, Napędy i Sterowanie, 17, 4, pp.112- 116, 2015
• 14. Kollek W. Osiński P.: Modelling and design of gear pumps, Wroclaw University of Technology Publishing House, Wrocław, 2009
• 15. Kollek W., Osiński P., Stosiak M., Wilczyński A., Cichoń P.: Problems relating to high-pressure gear micropumps, Archives of Civil and Mechanical Engineering, Vol. 14, nr 1, 2014
• 16. Kollek W., Radziwanowska U.: Energetic efficiency of gear micropumps. Archives of Civil and Mechanical Engineering, Vol. 15, nr 1, 2015
• 17. Kudźma S. Kudźma Z.:  Refined model of passive branch damper of pressure fluctuations, Journal of Theoretical and Applied Mechanics, vol, 53, nr 3, 2015
• 16. Osiński P., Deptuła A., Partyka M. A.: Discrete optimization of a gear pump after tooth root undercutting by means of multi-valued logic trees, Archives of Civil and Mechanical Engineering, Vol. 13. nr 4, 2013
• 19. Osiński P.: High-Pressure and Low-Fluctuation Internal Gear Pumps (in Polish), Wrocław University of Technology Publishing House, Wrocław, 2013
• 20. Osiński P., Kollek W.: Assessment of energetistic measuring techniques and their application to diagnosis of acoustic condition of hydraulic machinery and equipment, Archives of Civil and Mechanical Engineering, Vol. 13, 3, pp.167-172, 2013
• 21. Osiński P.: Modelling and design of gear pumps with modified tooth profile, Saarbrücken : LAP Lambert Academic Publishing, 2014
• 22. Osiński P., Kollek W., Wilczyński A.: The use of a series of Renard in the design of hydraulic and pneumatic components (in Polish), Hydraulika i Pneumatyka, 2010
• 23. Partyka M. A.: Some remarks on the Quine – Mc Cluskey minimization algorithm of multiple- valued partial functions for design structures. – 7th Inter. Cong. Log. Method. Phil. Sc., Salzburg, Austria, 1983
• 24. Partyka M. A.: The Quine- Mc Cluskey minimization algorithm of individual multiple- valued partial functions for digital control systems. – 3rd Inter. Confer. Syst. Engin., Wright State University, Dayton, USA, 1984
• 25. Partyka M.A.: Algorytm Quine’a-Mc Cluskeya minimalizacji indywidualnych cząstkowych wielowartościowych funkcji logicznych, Studia i Monografie Nr 109, Politechnika Opolska – Oficyna Wydawnicza, Opole, 1999.
• 26. Rudnicki J.: The evaluation of the vibration measurement usability of electronic indicator LEMAG „PREMET C”. Journal of Polish CIMAC, Vol. 7, 2, pp. 167-172, 2012
• 27. Shwnoy P.P.: Game trees for decision analysis. Theory and decision, 44(2), April, pp.149-171, 1998
• 28. Shiue Y.R., Guh. R.S.: The optimization of attribute selection in decision tree-based production control systems. The International Journal of Advanced Manufacturing Technology, 28, pp.737-746, 2006
• 29. Stryczek J., Stryczek S.: Gear pumps - a brief history (in Polish), Part 1. SINH. Sterowanie i Napęd Hydrauliczny, 1994
• 30. Stryczek S.: Hydrostatic Drives (in Polish), Vol. I, II. WNT, Warsaw., 1995
• 31. Stryczek S.: Two hundred years of hydrostatic drive , In: Drives and control hydraulic ‘96 . Scientific-Technical Conference, Szklarska Poreba (in Polish), June 1996, Wroclaw University of Technology Publishing House, 1996
• 32. Śliwiński P.: Flow of liquid in flat gaps of the satellite motor working mechanism, Polish Maritime Research 2(82) 2014 Vol 21; pp. 50-57
• 33. Śliwiński P.: The basics of design and experimental tests of the commutation unit of a hydraulic satellite motor, Volume 16, Issue 4, September 2016, Pages 634–644 Archives of Civil and Mechanical Engineering, 16, 4, 634-644, 2016
• 34. Quine W. V.: The problem of simplifying truth-functions, American mathematical monthly, 59, pp.521- 531, 1952

Identyfikatory

DOI

10.1515/pomr-2017-0006