Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
2017 | 24 | 3 |
Tytuł artykułu

An optimization study on an eco-friendly engine cycle named as dual-miller cycle (DMC) for marine vehicles

Warianty tytułu
Języki publikacji
The diesel engine is an indispensable par t of technolog y and it is commonly u sed in land and mar ine vehicles. However, diesel engines release NOx emissions due to high combustion temperatures. They have harmful effects on the environment such as sources of photo-chemical fog and climate changes. Therefore, they must be reduced and limited. The Miller cycle application is a NOx control method and it is popular in the recent years to abate NOx produced from the internal combustion engines (ICEs). A performance investigation of a Dual-Miller cycle (DMC) engine in terms of power (PO), power density (PD) and effective efficiency (EE) has been performed using a new finite-time thermodynamics modeling (FTTM) in this study. The effects of engine design and operating parameters on the engine performance (EPER) have been examined. Additionally, the energy losses have been determined resulting from incomplete combustion (IC), friction (FR), heat transfer (HT) and exhaust output (EO). The results presented could be an essential tool for DMC marine engine designers
Słowa kluczowe
Opis fizyczny
  • Yildiz Technical University, Barbaros, 34349 Istanbul, Turkey
  • 1. Al-Sarkhi, A., Akash, B.A. & Jaber, J.O., 2002. Efficiency of Miller Engine at Maximum Power Density. Int Commun Heat Mass, 29, pp.1159-1167.
  • 2. Al-Sarkhi, A., Jaber, J.O., Probert, S.D., 2006. Efficiency of a Miller engine. Appl Energ, 83,pp.343–351.
  • 3. Al-Sarkhi, A., Al-Hinti, I., Abu-Nada, E., Akash, B., 2007. Performance evaluation of irreversible Miller engine under various specific heat models. Int Commun Heat Mass, 34, pp.897–906.
  • 4. Anderson, M., Assanis, D., Filipi, Z., 1998. First and second law analyses of a naturally-aspirated, Miller cycle, SI engine with late intake valve closure. SAE Technical Paper Series, 980889, pp.1–16.
  • 5. Benajes, J., Molina, S., Novella, R., Belarte, E., 2014. Evaluation of massive exhaust gas recirculation and Miller cycle strategies for mixing-controlled low temperature combustion in a heavy duty diesel engine. Energy, 71, 355-366.
  • 6. Chen, L., Wu, C. & Sun, F.R., 1999. Finite time thermodynamic optimization or entropy generation minimization of energy systems. J. Non-Equilib. Thermody n., 24(4), pp.327-359.Chen, L . & Su n, F.R ., 20 04. Advances in Finite Time Thermodynamics: Analysis and Optimization. New York: Nova Science Publishers,
  • 7. Chen, L., 2005. Finite-Time Thermodynamic Analysis of Irreversible Processes and Cycles. Beijing: High Education Press. (in Chinese).
  • 8. Chen, L., Ge, Y., Sun, F., & Wu, C., 2006. Effects of heat transfer, friction and variable specific heats of working fluid on per forma nce of a n irreversible Dua l c ycle. Energ y Convers. Manage., 47(18/19), pp.3224-3234.
  • 9. Chen, L., Ge, Y., Sun, F., & Wu, C., 2010. The performance of a Miller cycle with heat transfer, friction and variable specific heats of working fluid. Termotehnica, 14(2), pp.24-32.
  • 10. Chen, L., Ge, Y., Sun, F., & Wu, C., 2011. Finite time thermodynamic modeling and analysis for an irreversible Miller cycle. Int. J. Ambient Energy, 32(2), pp.87-94.
  • 11. Chen, L. & Xia, S.J., 2016. Generalized Thermodynamic Dynamic-Optimization for Irreversible Processes. Beijing: Science Press. (in Chinese).
  • 12. Chen, L., Xia, S.J. & Li, J., 2016. Generalized Thermodynamic Dynamic-Optimization for Irreversible Cycles. Beijing: Science Press. (in Chinese).
  • 13. Clarke, D., & Smith, W.J., 1997. Simulation, implementation and analysis of the Miller cycle using an inlet control rotary valve, Variable valve actuation and power boost. SAE Special Publications, 1258(970336), pp. 61–70.
  • 14 . Ebrahimi, R., 2011a. Thermodynamic modeling of performance of a Miller cycle with engine speed and variable specific heat ratio of working fluid. Computers and Mathematics with Applications, 62, pp.2169–2176.
  • 15. Ebrahimi, R., 2011b. Effects of mean piston speed, equivalence ratio and cylinder wall temperature on performance of an Atkinson engine. Mathematical and Computer Modelling, 53, pp.1289-1297.
  • 16. Ebrahimi, R., 2012. Performance analysis of an irreversible Miller cycle with considerations of relative air–fuel ratio and stroke length. Applied Math Modeling, 36, pp.4073–4079.
  • 17. EES Academic Professional Edition, 2016. V.10.112-3D, USA, F-Chart Software.
  • 18. Ferguson, C.R., 1986. Internal combustion engines – applied thermosciences. New York: John Wiley & Sons Inc.
  • 19. Gahruei, M.H,, Jeshvaghani, H.S., Vahidi, S., & Chen, L., 2013. Mathematical modeling and comparison of air standard Dual and Dual-Atkinson cycles with friction, heat transfer and variable specific-heats of the working fluid. Applied Mathematical Modelling, 37(12-13), pp.7319-7329.
  • 20. Ge, Y., Chen, L., Sun, F., & Wu, C., 2005a. Reciprocating heat-engine cycles. Appl. Energy, 81, pp.397–408.
  • 21. Ge, Y., Chen, L., Sun, F., & Wu, C., 2005b. Effects of heat transfer and friction on the performance of an irreversible air-standard Miller cycle. Int. Comm. Heat Mass Transfer, 32(8), pp.1045-1056.
  • 22. Ge, Y., Chen, L., Sun, F., & Wu, C., 2005c. Effects of heat transfer and variable specific heats of working fluid on performance of a Miller cycle. Int. J. Ambient Energy, 26(4), pp.203-214.
  • 23. Ge, Y., Chen, L., Sun, F., & Wu, C., 2008. Finite-Time Thermodynamic Modelling and Analysis of an Irreversible Otto-Cycle. Appl Energy, 85, pp.618-24.
  • 24. Ge, Y., Chen, L., & Sun, F., 2009. Finite time thermodynamic modeling and analysis for an irreversible Dual cycle. Math. Comput. Model., 50(1-2), pp.101-108.
  • 25. Ge, Y., Chen, L., & Sun, F., 2016. Progress in finite time thermodynamic studies for internal combustion engine cycles. Entropy, 18(4), pp.139.
  • 26. Gonca, G., 2016a. Comparative performance analyses of irreversible OMCE (Otto Miller cycle engine)-DiMCE (Diesel miller cycle engine)-DMCE (Dual Miller cycle engine). Energy, 109, pp.152–159.
  • 27. Gonca, G., 2016b. Thermodynamic analysis and performance maps for the irreversible Dual–Atkinson cycle engine (DACE) with considerations of temperature-dependent specific heats, heat transfer and friction losses.Energy Conversion and Management, 111, pp.205–216.
  • 28. Gonca, G., 2017a. Thermo-Ecological Analysis of Irreversible Dual-Miller Cycle (DMC) Engine Based on the Ecological Coefficient of Performance (ECOP) Criterion, Iran J Sci Technol Trans Mech Eng (In press.), doi:10.1007/s40997-016-0060-2.
  • 29. Gonca, G., 2017b. Exergetic and ecological performance analyses of a gas turbine system with two intercoolers and two re-heaters. Energy, 124, pp. 579-588.
  • 30. Gonca, G., 2017c. Effects of engine design and operating parameters on the performance of a spark ignition (SI) engine with steam injection method (SIM). Applied Math. Model., 44, pp. 655-675.
  • 31. Gonca, G., 2017d. Performance Analysis of A Spark Ignition (SI) Otto Cycle (OC) Gasoline Engine Under Realistic Power (RP) and Realistic Power Density (RPD) Conditions. Journal of Polytechnic, 20(2), pp.475-486.Gonca, G., Sahin, B., Ust, Y., & Parlak A., 2013a. A study on late intake valve closing Miller cycled diesel engine. Arab J Sci Eng, 38, pp.383–393.
  • 32. Gonca, G., Sahin, B., & Ust, Y., 2013b. Performance maps for an air-standard irreversible dual-Miller cycle (DMC) with late inlet valve closing (LIVC) version. Energy, 5, pp.285–290.
  • 33. Gonca, G., & Sahin, B., 2014. Performance Optimization of an Air-Standard Irreversible Dual-Atkinson Cycle Engine Based on the Ecological Coefficient of Performance Criterion. The Scientific World Journal, 815787, pp.1–10.
  • 34. Gonca, G., Sahin, B., Ust, Y., Parlak, A., & Safa, A., 2015a. Comparison of Steam Injected Diesel Engine and Miller Cycled Diesel Engine By Using Two Zone Combustion Model. J Energy Inst,88(1), pp.43–52.
  • 35. Gonca, G., Sahin, B., Parlak, A., Ust, Y., Ayhan, V., Cesur, I., & Boru, B., 2015b. Theoretical and experimental investigation of the Miller cycle diesel engine in terms of performance and emission parameters. Appl.Energy, 138, pp.11–20.
  • 36. Gonca, G., Sahin, B., & Ust, Y., 2015c. Investigation of heat transfer influences on performance of air-standard irreversible dual-Miller cycle. J. Thermophys Heat Trans, 29(4), pp.678–683.
  • 37. Gonca, G., Sahin, B., Parlak, A., Ayhan, V., Cesur, I., & Koksal, S., 2015d. Application of the Miller cycle and turbo charging into a diesel engine to improve performance and decrease NO emissions. Energy, 93, pp.795–800.
  • 38. Gonca, G., Sahin, B., Ust, Y., & Parlak, A., 2015e. Comprehensive performance analyses and optimization of their reversible thermodynamic cycle engines (TCE) under maximum power (MP) and maximum power density (MPD) conditions. Appl Thermal Eng, 85, pp.9–20.
  • 39. Gonca, G., & Sahin, B., 2016. The influences of the engine design and operating parameters on the performance of a turbocharged and steam injected diesel engine running with the Miller cycle. Applied Mathematical Modelling, 40, pp.3764-3782.
  • 40. Gonca, G., & Sahin, B., 2017a. Effect of turbo charging and steam injection methods on the performance of a Miller cycle diesel engine (MCDE). Applied Thermal Engineering, 118, pp.138-146.
  • 41. Gonca, G., & Sahin, B., 2017b. Thermo-ecological performance analysis of a Joule-Brayton cycle (JBC) turbine with considerations of heat transfer losses and temperature-dependent specific heats. Energy Conversion and Management 138, pp. 97-105.
  • 42. Gonca, G., Sahin, B., Parlak, A., Ayhan, V., Cesur, I., & Koksal, S., 2017. Investigation of the effects of the steam injection method (SIM) on the performance and emission formation of a turbocharged and Miller cycle diesel engine (MCDE). Energy, 119, pp.926-937.
  • 43. Hohenberg, G., 1979. Advanced Approaches for Heat Transfer Calculations. SAE, 790825.
  • 44. Imperato, M., Kaario, O., Sarjovaara, T., Larmi, M., 2016. Split fuel injection and Miller cycle in a large-bore engine. Applied Energy, 162, pp.289–297.
  • 45. Li, T., Gao, Y., Wang, J., & Chen, Z., 2014. The Miller cycle effects on improvement of fuel economy in a highly boosted, high compression ratio, direct-injection gasoline engine: EIVC vs LIVC. Energy Convers and Manage, 79, pp.59–65.
  • 46. Li, T., Wang, B., Zheng, B., 2016. A comparison between Miller and five-stroke cycles for enabling deeply downsized, highly boosted, spark-ignition engines with ultra expansion. Energy Conversion and Management, 123, pp.140–152.
  • 47. Lin, J., Chen, L., Wu, C., & Sun, F., 1999. Finite-Time Thermodynamic Performance of a Dual Cycle. Int J Energy Res, 23(9), pp.765–772.
  • 48. Lin, J.C., & Hou, S.S., 2008. Effects of Heat Loss As Percentage of Fuel’s Energy, Friction And Variable Specific Heats Of Working Fluid On Performance of Air Standart Otto Cycle. Energ Convers Manage, 49, pp.1218–27.
  • 49. Luo, Q., Sun, B., 2016. Effect of the Miller cycle on the performance of turbocharged hydrogen internal combustion engines. Energy Conversion and Management, 123, pp.209–217.
  • 50. Martins, M.E.S., & Lanzanova, T.D.M., 2015. Full-load Miller cycle with ethanol and EGR: Potential benefits and challenges. Applied Thermal Engineering, 90, 274-285.
  • 51. Mikalsen, R., Wang, Y.D., & Roskilly, A.P., 2009. A comparison of Miller and Otto cycle natural gas engines for small scale CHP applications. Applied Energy, 86, pp.922–927.
  • 52. Miller, R.H., 1947. Supercharging and internal cooling cycle for high output, Transactions of ASME, 69, pp.453–457.
  • 53. Miller, R.H., & Lieberherr, H.U., 1957. The Miller supercharging system for diesel and gas engines operating characteristics, CIMAC, Proceedings of the 4th International Congress on Combustion Engines, Zurich, June 15–22, pp. 787–803.
  • 54. Mousapour, A., Hajipour, A., Rashidi, M.M., Freidoonimehr, N., 2016. Performance evaluation of an irreversible Miller cycle comparing FTT (finite-time thermodynamics) analysis and ANN (artificial neural network) prediction. Energy, 94, pp.100-109.
  • 55. Okamoto, K., Zhang, F.R., Morimoto, S., & Shoji, F., 1998. Development of a high-performance gas engine operating at a stoichiometric condition – effect of Miller cycle and EGR, Proceedings of CIMAC Congress, Copenhagen, pp. 1345–1360.
  • 56. Rashidi, M.M., Mousapour, & A., Hajipour, A., 2014. The effects of heat transfer on the exergy efficiency of an air-standard Otto cycle. Heat Mass Transfer, 50, pp.1177–83.
  • 57. Rashidi, M.M., & Hajipour, A., 2013. Comparison of Performances of Air-Standard Atkinson, Diesel and Otto Cycles with Constant Specific Heats. Int J Advanced Design and Manufacturing Technology, 6,pp.57–62.
  • 58. Rashidi, M.M., Hajipour, A., Mousapour, A., Ali, M., Xie, G., & Freidoonimehr, N., 2014. First and Second-Law Efficiency Analysis and ANN Prediction of a Diesel Cycle with Internal Irreversibility, Variable Specific Heats, Heat Loss, and Friction Considerations. Advances in Mechanical Engineering, 359872, pp.1–16.
  • 59. Rashidi, M.M., Hajipour, A., & Fahimirad, A., 2014. First and Second-Laws Analysis of an Air-Standard Dual Cycle With Heat Loss Consideration. International Journal of Mechatronics, Electrical and Computer Technology, 4, pp.315-332.
  • 60. Rashidi, M.M., Hajipour, A., & Baziar, P., 2014. Influence of Heat Loss on the Second-Law Efficiency of an Otto Cycle. International Journal of Mechatronics, Electrical and Computer Technology, 4, pp.922-933.
  • 61. Rinaldini, C.A., Mattarelli, E., & Golovitchev, V.I., 2013. Potential of the Miller cycle on a HSDI diesel automotive engine. Applied Energy,112, pp.102-19.
  • 62. Shimogata, S., Homma, R., Zhang, F.R., Okamoto, K., & Shoji, F., 1997. Study on Miller cycle gas engine for co-generation systems-numerical analysis for improvement of efficiency and power. SAE Paper No. 971709, pp. 61–67.
  • 63. Stebler, H., Weisser, G., Horler, H., & Boulouchos, K., 1996. Reduction of NOx emissions of D.I. Diesel engines by application of the Miller-system: an experimental and numerical investigation, SAE Paper No. 960844, pp. 1238–1248.
  • 64. Ust, Y., Arslan, F., Ozsari, I., & Cakir, M., 2015. Thermodynamic performance analysis and optimization of DMC (Dual Miller Cycle) cogeneration system by considering exergetic performance coefficient and total exergy output criteria. Energy, 90, pp.552–559.
  • 65. Wang, W.H., Chen, L., Sun, F., & Wu, C., 2002. The effects of friction on the performance of an air standard Dual cycle. Exergy, An Int. J., 2(4), pp.340-344.
  • 66. Wang, Y.D., & Ruxton, T., 2004. An experimental investigation of NOx emission reduction from automotive engine using the miller cycle. Proceedings of ICEF2004, A SM E I nter na l C ombu s t ion E ng i ne Div i sion, Fa l l Te ch n ic a l Conference, Long Beach, CA, USA, October 24–27.
  • 67. Wang, Y., Zeng, S., & Huang, J., 2005. Experimental investigation of applying Miller cycle to reduce NOx emission from diesel engine. Proc. IMechE, Part A: J. Power and Energy, 219, pp.631-638.
  • 68. Wang, Y., Lin, L., & Roskilly, A.P., 2007. An analytic study of applying Miller cycle to reduce NOx emission from petrol engine. Appl Therm Eng, 27, pp.1779–1789.
  • 69. Wang, Y., Lin, L., & Zeng, S., 2008. Application of the Miller cycle to reduce NOx emissions from petrol engines. Appl. Energy, 85, pp.463– 474.
  • 70. Wang, Y., Zu, B., X,u Y., Wang, Z., Liu, J., 2016. Performance analysis of a Miller cycle engine by an indirect analysis method with sparking and knock in consideration. Energy Conversion and Management, 119, pp.316–326.
  • 71. Wu, C., Chen, L.G. & Chen, J.C., 1999. Recent Advances in Finite Time Thermody na mics. New York : Nova Science Publishers,
  • 72. Wu, C., Puzinauskas, P.V. & Tsai, J.S., 2003. Performance analysis and optimization of a supercharged Miller cycle Otto engine. Appl Therm Eng, 23, pp.511-521.
  • 73. Tavakoli, S., Jazayeri, S.A., Fathi, M., Jahanian, O., 2016. Miller cycle application to improve lean burn gas engine performance. Energy, 109, pp.190-200.
  • 74 . Zhao, Y., & Chen, J., 2007. Performance analysis of an irreversible Miller heat engine and its optimum criteria. Appl Therm Eng, 27, pp.2051–2058.Zhao, J., 2017. Research and application of over-expansion cycle (Atkinson and Miller) engines– A review. Applied Energy, 185, pp.300–319.
  • 75. Zhu, S., Deng, K., Liu, S., Qu, S., 2015. Comparative analysis and evaluation of turbocharged Dual and Miller cycles under different operating conditions. Energy, 93, pp.75-87.
Typ dokumentu
Identyfikator YADDA
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.