Study on green water of tumblehome hull using dam-break flow and ranse models

• Autorzy: Sun S. , Du W. , Li H.
• Języki publikacji: EN

Abstrakty

EN

The tumblehome hull adopts some novelty designs such as low-tumblehome freeboard and wave-piercing bow. The new form design makes the ship have many special hydrodynamic performances. Especially the green water of tumblehome hull is different from that of hulls with flare free board. Green water is a strong nonlinear phenomenon of ship-wave interaction, the variation of free surface of liquid is complicated, and there are still some difficulties to solve green water problems well with numerical simulation method. In this paper firstly the motion responses of the tumblehome hull was calculated based on 3D potential theory, and then the dam-break flow model was used to calculate green water height and pressure distribution. According to the result of numerical simulation, some typical working conditions are chosen for 3D CFD simulation using RANS method. The results of numerical simulation methods are compared with the experimental results measured in towing tank. The influence of different ship form parameters and wave parameters to the green water of tumblehome hull is analyzed, and some regularities of green water on tumblehome hull in regular waves are summarized

• Wydawca: -
• Czasopismo: Polish Maritime Research
• Rocznik: 2017
• Tom: 24
• Numer: Special Issue S2
• Opis fizyczny: p.172-180,fig.,ref.

Twórcy

autor

Sun S.

• College of Shipbuilding Engineering, Harbin Engineering University, Harbin, Heilongjiang, China

autor

Du W.

• College of Shipbuilding Engineering, Harbin Engineering University, Harbin, Heilongjiang, China

autor

Li H.

• College of Shipbuilding Engineering, Harbin Engineering University, Harbin, Heilongjiang, 150001, China

Bibliografia

• 1. Zhang Jinfeng, Gu Min, Wei Jianqiang. Model testing and theoretic study of the longitudinal motions in waves of low-freeboard stealthy ship. Journal of Ship Mechanics. No.2 Vol. 13, 2009, pp.169-176
• 2. WEI Chengzhu, LI Yinghui, YU Shengjie, YI Hong. Experimental Study on the High Speed Mono-WavePiercing Boat. J. Shanghai Jiaotong Univ (Sci.). No.5 Vol.21, 2016, pp. 524-529
• 3. JIANG Zhifang, HUANG Weigang, QIU Liaoyuan et al. Simulation Analysis of Non-Linear Roll of a Tumblehome Hull Ship. Chinese Journal of Ship Research. No.1 Vol. 9, 2014, pp.40-51
• 4. PHAM X P, VARYANI K S. Evaluation of green water loads on high-speed containership using CFD. Ocean Engineering. No.5-6 Vol. 32, 2005, pp. 571–585
• 5. ZHANG Yongxiang, CHEN Jingqiu. Numerical simulation of 2-D dam-break flow wave by using conservation element and solution element method. Journal of Hydraulic Engineering, No.36 Vol.10, 2005, pp.1224-1229
• 6. Yonguk Ryu, Kuang-An Chang, Richard Mercier. Application of dam-break flow to green water prediction. Applied Ocean Research. No.3 Vol.29, 2007, pp. 128–136
• 7. SAMES P C. Prediction of green water loads for a roro passenger ferry. Proceedings of OMAE 21st International Conference on Offshore Mechanics and Artic Engineering, 2002, Oslo, Norway.
• 8. LIANG Xiufeng, YANG Jianmin, LI Xin., Numerical simulation of Green water on FPSO. Journal of Hydrodynamics. No.2 Vol. 22, 2007, pp. 229-236
• 9. FUNENO I. On viscous flow around marine propellershub vortex and scale effect. Proceedings of New S-Tech. No.238 Vol. 2002, 2002, pp. 17-27
• 10. LIU Zhihua, XIONG Ying, ZHANG Yongkun. Study on separating calculation method for ship model wave resistance based on RANS equation and its availability. Journal of Ship Mechanics, No.11 Vol.14, 2010, pp.1213-1218
• 11. M. Gomez-Gesteira, D. Cerqueiro, C. Crespo, R.A. Dalrymple. Green water overtopping analyzed with a SPH model. Ocean EngineeringNo.2 Vol.32, 2005, pp. 223–238
• 12. D. Le Touzé, A. Marsh1, G. Oger, P.-M. Guilcher, C. Khaddaj-Mallat1, B. Alessandrini1, P. Ferrant. SPH simulation of green water and ship flooding scenarios. No.5 Vol.22, 2010, pp. 231-236
• 13. Kristian Bendix Nielsen, Stefan Mayer. Numerical prediction of green water incidents. Ocean Engineering. No.3-4 Vol.31, 2004, pp. 363–399

Identyfikatory

DOI

10.1515/pomr-2017-0080