Evaluation of losses in a hydraulic motor based on the SWSB-63 motor tests

• Autorzy: Maczyszyn A.
• Języki publikacji: EN

Abstrakty

EN

In this paper are compared two models of energy losses: that suggested by Prof. Paszota, Z. in monograph “Energy losses in the hydraulic displacement motors – definitions and relations serving the evaluation of the efficiency of hydrostatic drive” [18] and that of Prof. Balawender, A. in “Energy analysis and methodology of testing of low-speed hydraulic motors” [1]. By using the data obtained from the tests of SWSB-63 hydraulic motors [2] the graphs which illustrate mechanical, volumetric and pressure losses in function of the parameters on which the losses directly depend [18 ], have been elaborated and showed in comparison with the description of such losses in function of the parameters assumed in [1].The below presented text has been complemented in relation to that published in the monograph [4] and read during the scientific technical conference „Cylinder 2010” organized by the Mining Engineering Centre „Komag”, Gliwice, and held on 20÷22 September 2010 in Rytro, Poland

• Wydawca: -
• Czasopismo: Polish Maritime Research
• Rocznik: 2010
• Tom: 17
• Numer: 4
• Opis fizyczny: p.46-53,fig.,ref.

Twórcy

autor

Maczyszyn A.

• Faculty of Ocean Engineering and Ship Technology, Gdansk University of Technology, Narutowicza 11/12, 80-952 Gdansk, Poland

Bibliografia

• 1. Balawender A.: Energy analysis and set of testing methods of slow-speed hydraulic motors (in Polish). Wydawnictwo Politechnika Gdańska (Gdańsk University of Technology Publishing House), Gdańsk 1988
• 2. Balawender A., Osiecki A., Paszota Z., Klimkiewicz W., Ciepielowski J.: Tests of the SWSB-63 large- moment medium-pressure hydraulic motor (in Polish). Scientific research project, Gdańsk University of Technology, Gdańsk 1972
• 3. Balawender A.: Physical and mathematical models of losses in hydraulic motors. In: Developments in Mechanical Engineering, Chapter 19, ed. Barylski, A., Ciesliński, J. T. Wydawnictwo Politechnika Gdańska (Gdańsk University of Technology Publishing House), Gdańsk 2005
• 4. Maczyszyn A.: Assessment of losses in hydraulic motor on the example of SWSB-63 motor tests (in Polish). A chapter of the monograph on „Research, designing, manufacturing and operating of hydraulic systems” (in Polish), ed. Klich A., Kozieł A., Palczak E. The library „Cylinder”. Centrum Mechanizacji Górnictwa „Komag” (Mining Industry Mechanization Centre), Gliwice 2010
• 5. Paszota Z.: Aspects energetiques des transmissions hydrostatiques. Wydawnictwo Politechnika Gdańska (Gdańsk University of Technology Publishing House), Gdańsk 2002
• 6. Paszota Z.: Model of pressure losses in displacement pump used in hydrostatic drive (in Polish). Materials of the 8th Scientific Conference „ Ship Technology and Ocean Engineering” on „Development prospects of transport systems”. Międzyzdroje, 7-9 June 2006. Szczecin Technical University Publishing House, Szczecin 2006
• 7. Paszota Z.: Model of volumetric losses in displacement pump of variable capacity used in hydrostatic drive (in Polish). In: Napędy i Sterowanie 2006 (Drives and Control). The Scientific Technical Seminar “TECHNICON’06” accompanying the Fairs for Producers, Sub-contractors and Sellers of Drive Units and Control Systems, Gdańsk, 25 October 2006.
• 8. Paszota Z.: The power of energy losses in elements of hydrostatic drive system - definitions, relations, variability ranges, energy efficiences, Part I. Hydraulic motor (in Polish). Napędy i Sterowanie, No. 11(103), November 2007
• 9. Paszota Z.: Graphical presentation of the power of energy losses and power developed in elements of hydrostatic drive and control system, Part I -Rotational hydraulic motor speed series throttling control and volumetric control systems (in Polish). A chapter of the monograph on „Research, designing, 53POLISH MARITIME RESEARCH, No 4/2010manufacturing and operating of hydraulic systems” (in Polish), ed. Klich A., Kozieł A., Palczak E., The library „Cylinder”. Centrum Mechanizacji Górnictwa „Komag” (Mining Industry Mechanization Centre), Gliwice 2008
• 10. Paszota Z.: Graphical presentation of the power of energy losses and power developed in the elements of hydrostatic drive and control system, Part II - Rotational hydraulic motor speed parallel throttling control and volumetric control systems (in Polish). A chapter of the monograph on „Research, designing, manufacturing and operating of hydraulic systems” (in Polish), ed. Klich A., Kozieł A., Palczak E., The library „Cylinder”. Centrum Mechanizacji Górnictwa „Komag” (Mining Industry Mechanization Centre), Gliwice 2008
• 11. Paszota Z.: Direction of power flux increase in hydrostatic drive and control system. Graphical presentation of the power of energy losses and the power developed in elements of the system, Part I. - Rotational hydraulic motor speed series throttling control and volumetric control systems (in Polish). Napędy i Sterowanie, No. 10 (114), October 2008
• 12. Paszota Z.: Direction of power flux increase in hydrostatic drive and control system. Graphical presentation of the power of energy losses and the power developed in elements of the system, Part II. - Rotational hydraulic motor speed parallel throttling control and volumetric control systems (in Polish). Napędy i Sterowanie, No. 11 (115), November 2008
• 13. Paszota Z.: Graphical presentation of the power of energy losses and power developed in the elements of hydrostatic drive and control system. Part I – Rotational hydraulic motor speed series throttling control systems. Polish Maritime Research 3 (57), Vol. 15, 2008
• 14. Paszota Z.: Graphical presentation of the power of energy losses and power developed in the elements of hydrostatic drive and control system. Part II – Rotational hydraulic motor speed parallel throttling control and volumetric control systems. Polish Maritime Research 4 (58),Vol. 15, 2008
• 15. Paszota Z.: The operating field of hydrostatic drive system (in Polish). A chapter of the monograph on „Research, designing, manufacturing and operating of hydraulic systems” (in Polish), ed. Klich A., Kozieł A., Palczak E., The library „Cylinder”. Centrum Mechanizacji Górnictwa „Komag” (Mining Industry Mechanization Centre), Gliwice 2009
• 16. Paszota Z.: Parameters of efficiency investigations of hydraulic pumps and motors. Operating field of hydrostatic drive (in Polish). Napędy i Sterowanie, No. 11 (127), November 2009
• 17. Paszota Z.: The operating field of a hydrostatic drive system parameters of the energy efficiency investigations of pumps and hydraulic motor. Polish Maritime Research 4 (62), Vol. 16, 2009
• 18. Paszota Z.: Energy losses in hydraulic displacement motor - definitions and relations for assessing efficiency of hydrostatic motor and drive (in Polish). A chapter of the monograph on „Research, designing, manufacturing and operating of hydraulic systems” (in Polish), ed. Klich A., Kozieł A., Palczak E., The library „Cylinder”. Centrum Mechanizacji Górnictwa „Komag” (Mining Industry Mechanization Centre), Gliwice 2010
• 19. Paszota Z.: Theoretical and mathematical models of mechanical losses in rotational hydraulic motor used in hydrostatic drive (in Polish). A chapter of the monograph on „Research, designing, manufacturing and operating of hydraulic systems” (in Polish), ed. Klich A., Kozieł A., Palczak E., The library „Cylinder”. Centrum Mechanizacji Górnictwa „Komag” (Mining Industry Mechanization Centre), Gliwice 2010.

Identyfikatory

DOI

10.2478/v10012-010-0035-y