Problems of determination of welding angular distortions of T-fillet joints in ship hull structures

• Autorzy: Kozak J. , Kowalski J.
• Języki publikacji: EN

Abstrakty

EN

Ship hull structure elements are usually joined by welding. Welding distortions may cause many problems during manufacturing process. In the literature a wide spectrum of suggestions has been proposed for correct estimation of welding deformation , particularly angular ones , in the fillet welded T- joints. In this work a verification of certain methods selected from the literature is presented basing upon the results of the laboratory measurements. To this end, values determined on the basis of engineering hypotheses have been compared with those obtained from the laboratory tests

• Wydawca: -
• Czasopismo: Polish Maritime Research
• Rocznik: 2015
• Tom: 22
• Numer: 2
• Opis fizyczny: p.79-85,fig.,ref.

Twórcy

autor

Kozak J.

• Gdansk University of Technology, 11/12 Narutowicza St., 80-233 Gdansk, Poland

autor

Kowalski J.

• Gdansk University of Technology, 11/12 Narutowicza St., 80-233 Gdansk, Poland

Bibliografia

• 1. Brzozowska A.: Review and verification of formulas for estimating angular distortions in T-joints (in Polish). Diploma thesis, Faculty of Offshore Engineering and Shipbuilding, Gdańsk University of Technology , 2014
• 2. Ferenc K., Ferenc J.: Welded structures, Joints (in Polish). Wydawnictwa Naukowo-Techniczne (Publishers), Warszawa , 2000
• 3. Gourd L.M.: Principles of Welding Technology. The Welding Institute, London, 1995
• 4. Jakubiec M., Lesiński K. J., Czajkowski H.: Welding of steel structures (in Polish). Wydawnictwo Politechniki Gdańskiej (Publishers), Gdańsk, 1987
• 5. Jakubiec M., Lesiński K., Czajkowski H.: Technology of welded structures (in Polish). Wydawnictwa NaukowoTechniczne (Publishers), Warszawa 1987
• 6. Michaleris P., Debiccari A.: Prediction of Welding Distortion, a two-step numerical analysis technique developed to predict welding induced distortion and the structural integrity of large and complex structures. Paper presented at the AWS Annual Convention, April 1996, Chicago, ILL. Welding Research Supplement, April 1997
• 7. Myśliwiec M.: Thermal – mechanical background of welding technology (in Polish). Wydawnictwa NaukowoTechniczne (Publishers), Warszawa 1972
• 8. Myśliwiec M.: Welding technology in shipbuilding (in Polish), Wydawnictwo Morskie (Publishers), Gdańsk , 1971
• 9. O‘Brien, Roger William Predicting weld distortion in the design of automotive components. Durham theses, Durham University, 2007, Available at Durham E-Theses Online: http://etheses.dur.ac.uk/2462/
• 10. Okerblom N. O., Demjancevic V. P., Bajkova I. P.: Proektirovanie technologii izgotovlenija svarnych konstrukcij : rascetnye metody (in Russian).
• 11. Engineer’s handbook : Welding technology, Vol. I (in Polish). Wydawnictwa Naukowo-Techniczne (Publishers), Warszawa, 2003
• 12. Piwowar S.: Welding technology: Manufacturing techniques (in Polish). Państwowe Wydawnictwo Naukowe (Publishers), Warszawa , 1978
• 13. Polish Register of Shipping : Rules for the classification and construction of sea-going ships , Part II – Hull (in Polish ), Polski Rejestr Statków (Publishers), Gdańsk, 2015
• 14. Sędek P.: Problems of welding stresses and deformations (in Polish). Wydawnictwo i dystrybucja: Biuro Gamma (Publishing and disposal), Warszawa , 2000

Identyfikatory

DOI

10.1515/pomr-2015-0020