Density and mechanical properties of Scots pine (Pinus sylvestris L.) wood from a seedling seed orchard

• Autorzy: Mederski P.S. , Bembenek M. , Karaszewski Z. , Giefing D.F. , Sulima-Olejniczak E. , Rosinska M. , Lacka A.
• Języki publikacji: EN

Abstrakty

EN

Seedling seed orchard (SSO) growing conditions are different to those in the forest. Trees grow in wide spacing with more access to sunlight and competition between trees is less intense causing larger annual rings and limited height growth. The objective of this research was to: 1) determine the density and mechanical properties of Scots pine (Pinus sylvestris L.) wood grown in an SSO and 2) suggest the most suitable use of this wood. Five trees (25-year-old) were selected using the Urich II method. Final samples (from the height of dbh) were cut from pith to bark, in the four cardinal directions. From all five trees, 159 samples were used to determine: 1) the wood density, 2) the compressive strength parallel to the grain, 3) the modulus of rupture, and 4) the strength quality coefficient. For each property the following mean values were obtained: 327 kg m-3, 32 MPa, 59 MPa and 0.10, respectively. The density did not depend on the dbh or mean width of annual ring. At the same time, the mechanical properties depended strongly on the wood density. In all cases, the wood property values of the Scots pine from the SSO were lower in comparison with those published for Scots pine grown in regular stand conditions. Therefore, pine wood from SSOs should be used in the paper industry.

Słowa kluczowe

EN

density; mechanical property; Scotch pine; Pinus sylvestris; pine wood; seedling seed orchard; compressive strength; strength quality coefficient

• Wydawca: -
• Czasopismo: Drewno. Prace Naukowe. Doniesienia. Komunikaty
• Rocznik: 2015
• Tom: 58
• Numer: 195
• Opis fizyczny: p.117-124,fig.,ref.

Twórcy

autor

Mederski P.S.

• Department of Forest Utilisation, Poznan University of Life Sciences, Poznan, Poland

autor

Bembenek M.

• Department of Forest Utilisation, Poznan University of Life Sciences, Poznan, Poland

autor

Karaszewski Z.

• Wood Science and Application Department, Wood Technology Institute, Poznan, Poland

autor

Giefing D.F.

• Wood Science and Application Department, Wood Technology Institute, Poznan, Poland

autor

Sulima-Olejniczak E.

• Department of Forest Utilisation, Poznan University of Life Sciences, Poznan, Poland

autor

Rosinska M.

• Department of Forest Utilisation, Poznan University of Life Sciences, Poznan, Poland

autor

Lacka A.

• Department of Mathematical and Statistical Methods, Poznan University of Life Sciences, Poznan, Poland

Bibliografia

• Biuro Urządzania Lasu i Geodezji Leśnej [2013]: Wielkoobszarowa inwentaryzacja stanu lasów w Polsce (National Forest Inventory in Poland). Sękocin Stary
• Bouriaud O., Breda N., Le Moguedec G., Nepveu G. [2004]: Modelling variability of wood density in beech as affected by ring age, radial growth and climate. Trees 18 (3): 264–276
• Cameron A.D. [2002]: Importance of early selective thinning in the development of longterm stand stability and improved log quality: a review. Forestry 75 [1]: 26–35
• Dziewanowski R. [1965]: Analiza porównawcza jakości tartacznego drewna sosnowego z niektórych rejonów Polski (Comparative analysis of pine saw-wood quality from selected regions of Poland). Prace ITD, Zeszyt 1 pp. 49
• Jackowski J. [1972]: Badanie zależności pomiędzy szerokością słoi rocznych a jakością drewna w drzewostanach sosnowych Niziny Szczecińskiej (Studies on the relationship between the width of annual rings and wood quality in pine stands on the Szczecin Lowlands). Folia Forestalia Polonica, Seria B 11: 5–25
• Krzysik F. [1978]: Nauka o drewnie (Wood Science). PWN, Warszawa Kubiak M., Laurow Z. [1994]: Surowiec drzewny (Wood Raw Material). Fundacja Rozwój SGGW, Warszawa
• Lo Monaco A., Calienno L., Pelosi C., Balletti F., Agresti G., Picchio R. [2015]: Technical properties of beech wood from aged coppices in central Italy. iForest 8: 82–88
• Mederski P.S., Bembenek M., Karaszewski Z., Giefing D.F., Tomczak A., Węgiel A. [2013]: Annual rings characteristic of Scots pine (Pinus sylvestris L.) wood from a seedling seed orchard. Annals of Warsaw University of Life Sciences, Forestry and Wood Technology 83: 242–247
• Pazdrowski W. [1988]: Wartość techniczna drewna sosny zwyczajnej (Pinus sylvestris L.) w zależności od jakości pni drzew w drzewostanach rębnych (Technical value of Scots pine wood based on the quality of tree trunks in mature stands). Roczniki Akademii Rolniczej w Poznaniu, Rozprawy naukowe 170
• Pazdrowski W., Małecki S., Spława-Neyman S. [1995]: Wytrzymałość drewna sosny zwyczajnej (Pinus sylvestris L.) w zależności od początkowej więźby zakładanych upraw (Strength of Scots pine wood according to initial planting space). Folia Forestalia Polonica, Seria B 26: 55–60
• Pazdrowski W., Spława-Neyman S. [1999]: Initial plantations spacing being important element of investments in forestry. Intercathedra 15: 80–83
• Pazdrowski W., Spława-Neyman S., Wróblewska H. [1997]: Związki między więźbą zakładanych upraw a fizycznymi i mechanicznymi właściwościami drewna sosny zwyczajnej (Pinus sylvestris L.) (Relations between initial planting space and physical and mechanical properties of Scots pine wood). XI Konferencja Naukowa Wydziału Technologii Drewna SGGW, Warszawa
• Persson B., Persson A., Ståhl E. G., Karlmats U. [1995]: Wood quality of Pinus sylvestris progenies at various spacings. Forest Ecology and Management 76: 127–138
• Szaban J., Kowalkowski W., Karaszewski Z., Jakubowski M. [2014]: Effect of tree provenance on basic wood density of Norway spruce (Picea abies [L.] Karst.) grown on an experimental plot at Siemianice Forest Experimental Station. Drewno. Pr. Nauk. Donies. Komunik. 57 [191]: 135–143
• Tomczak A. [2013]: Selected technical parameters of juvenile wood in Scots pine (Pinus sylvestris L.) – variation between social classes of tree position in the dominant stand. Acta Scientarum Polonorum, Silvarum Colendarum Ratio et Industria Lignaria 12 [4]: 43–53
• Wróblewska H., Spława-Neyman S. [1995]: Właściwości chemiczne drewna sosny zwyczajnej (Pinus sylvestris L.) a więźba zakładanych upraw (Chemical properties of Scots pine wood in relation to initial planting space). Folia Forestalia Polonica, Seria B 26: 73–83
• Zobel B.J., Sprague J.R. [1998]: Juvenile wood in forest trees. Springer – Verlag, Berlin, Heidelberg, New York
• List of standards
• UNI-ISO-3131 Wood. Determination of density for physical and mechanical tests
• UNI-ISO-3133 Wood. Determination of ultimate strength in static bending
• UNI-ISO-3787 Wood. Determination of ultimate stress in compression parallel to grain

Identyfikatory

DOI

10.12841/wood.1644-3985.123.10